OEM Carrier Condenser Fan Motor 1/12 HP 208-230V for Model PH13NR018000ACAA

This is the OEM factory-specified condenser fan motor for the Carrier PH13NR018000ACAA split-system heat pump. The condenser fan motor drives the outdoor unit's fan blade, pulling air across the condenser coil to reject heat during cooling and absorb heat during heating. When this motor fails, the outdoor fan stops spinning — causing the unit to overheat, trip the high-pressure limit, and shut down entirely. Common symptoms include a humming outdoor unit with no fan movement, intermittent short-cycling, or a tripped high-pressure switch.

• Specs: 1/12 HP | 208-230V | 1100 RPM | 0.5A | Single-phase | 60 Hz | 0.5" shaft diameter | 1.5" shaft length | Frame 39 | Replaces HC31GE232A, HC31GE231, HC32GE230
• OEM vs Generic: This is the Carrier Factory Authorized Part (FAP), engineered to exact factory tolerances for the PH13NR018000ACAA. Generic motors can vary in RPM calibration and shaft geometry, leading to vibration, premature bearing failure, and reduced system efficiency.
• Install difficulty: 3/5 — Disconnect power at the breaker before servicing. Tools needed: 5/16" and 3/8" nut drivers, adjustable wrench, multimeter, and needle-nose pliers. Note fan blade pitch and rotation direction before removal. It is strongly recommended to replace the run capacitor simultaneously to prevent premature motor failure.
• Warranty: Covered by Carrier's OEM replacement warranty. Ships same business day from our stocked warehouse.

Compatibility: Direct OEM replacement for Carrier model PH13NR018000ACAA heat pump condenser units. Always verify horsepower, voltage, RPM, and shaft diameter against your unit's data plate before ordering. Our HVAC parts specialists are available to confirm fitment — order with confidence and get back up and running today.