OEM Carrier Condenser Fan Motor 1/4 HP 208/230V for Model PH13NB06100GBAAA

This is the factory-specified OEM condenser fan motor for the Carrier PH13NB06100GBAAA split-system air conditioner. Originally sold as part number HC39GE242 (now superseded by direct OEM replacement HB39GQ232), this motor drives the condenser fan blade to pull air across the outdoor coil and reject heat from the refrigerant circuit. When the motor fails, the outdoor unit will run briefly then trip on high-pressure lockout, or the condenser fan will stop spinning entirely — leaving your system unable to cool. Common failure signs include the fan blade not rotating, the motor humming without spinning, excessive heat near the condenser top, or the system short-cycling after only a few minutes of operation.

• Specs: 1/4 HP | 208/230V | 825 RPM | 1.20 Amps | 60 Hz | Single Phase | 48Y Frame | Clockwise rotation (shaft up) | 1/2" x 1.75" shaft | Closed enclosure with automatic thermal overload protection
• OEM vs Generic: This OEM motor is wound and balanced to Carrier factory specifications, ensuring correct RPM, airflow CFM, and amp draw for the PH13NB06100GBAAA. Generic motors often deviate in rotation direction, shaft length, or amperage — risking compressor damage from poor heat rejection.
• Install difficulty: 3/5 — Disconnect and lock out power before beginning. Tools needed: 1/4" and 5/16" nut drivers, wire stripper, multimeter, and a capacitor discharge tool. Note wiring connections and rotation direction before removing the old motor. Always replace the run capacitor at the same time to prevent premature motor failure.
• Warranty: 1-year OEM factory warranty against defects. Ships same business day from our climate-controlled warehouse.

Compatibility: Direct OEM replacement for Carrier model PH13NB06100GBAAA condensers. Supersedes original part number HC39GE242; current OEM part number is HB39GQ232. Also fits Bryant and Payne units sharing the same motor specification. Verify HP, RPM, voltage, and rotation on your unit's data plate before ordering. Our fitment team is available to confirm compatibility before you buy.