OEM Carrier Condenser Fan Motor 1/4 HP 208-230V for Model PH13NA036000ABAA (HC39GE226)

This OEM-spec condenser fan motor is the factory-authorized replacement for Carrier model PH13NA036000ABAA split-system air conditioners. The condenser fan motor drives the outdoor fan blade, pulling air across the condenser coil to expel heat from the refrigerant. When this motor fails, the system loses the ability to reject heat — leading to rapid high-pressure cutout, compressor overheating, or a complete system shutdown. Common failure symptoms include the outdoor fan not spinning, the unit short-cycling on high-pressure lockout, or a humming sound with no fan rotation.

• Specs: 1/4 HP | 208-230V | 1100 RPM | 1-Phase | 60 Hz | 1.4A | Frame 48 | 5-5/8" diameter | 0.5" shaft diameter | Clockwise rotation (shaft up) | Stud mountable | Requires separate 10 MFD 370V run capacitor
• OEM vs Generic: This OEM-spec motor is wound and balanced to Carrier factory tolerances, ensuring correct airflow CFM and bearing life matched to the PH13NA036000ABAA refrigerant circuit. Generic motors often deviate in RPM and amp draw, stressing the compressor and voiding unit warranties.
• Install difficulty: 3/5 — Disconnect and lock out power before servicing. Tools needed: 5/16" and 3/8" nut drivers, wire stripper, multimeter, and a blade puller for fan blade removal. Always photograph wiring and blade pitch before disassembly. Confirm rotation direction (CW when viewed from shaft end) before powering up.
• Warranty: 1-year OEM replacement warranty. Orders ship same business day from our warehouse when placed before cutoff.

Compatibility: Designed for Carrier model PH13NA036000ABAA 3-ton single-stage split-system condenser. Also cross-references successor part HB39GQ230 and GE/Genteq model 5KCP39FGY563S. Verify voltage, HP, and RPM on your unit's data plate before ordering. Our fitment team is available to confirm compatibility — reach out before you buy for peace of mind.