OEM Carrier Condenser Fan Motor 1/5 HP 208-230V 825 RPM for Model PH12NA048000ADAA

This is the factory OEM condenser fan motor for the Carrier PH12NA048000ADAA heat pump condenser unit, supplied under part numbers HC37GE210 and HC38GE231. The condenser fan motor drives the outdoor fan blade, pulling air across the condenser coil to reject heat and maintain proper refrigerant pressure. When this motor fails, you'll experience symptoms such as the outdoor unit running with no fan movement, the system tripping on high-pressure lockout, warm air from the supply registers, or the compressor shutting down on thermal overload within minutes of startup. In many cases, a failed motor is identifiable by a loud hum from the condenser cabinet with no blade rotation — a classic sign of a seized or capacitor-starved motor.

• Specs: 1/5 HP | 208-230V AC | 60 Hz | 825 RPM | 0.95A Full-Load Amps | Single Phase | Frame 48 | CWLE Rotation | 0.5" Diameter × 1.9" Shaft | Stud Mountable | Closed Enclosure
• OEM vs Generic: This is the genuine Carrier factory-authorized replacement (HC37GE210 / HC38GE231), engineered to exact frame, rotation, and amperage tolerances for the PH12NA048000ADAA. Generic aftermarket motors may deviate in shaft length or rotation direction, risking misalignment, premature bearing failure, or refrigerant system damage from inadequate airflow.
• Install Difficulty: 3/5 — Requires disconnecting high-voltage power and discharging the run capacitor before handling. Tools needed: 5/16" and 1/4" nut drivers, needle-nose pliers, wire stripper, and a multimeter. Important: Always replace the 7.5 MFD 370V run capacitor when replacing this motor — a weak capacitor is often the root cause of motor failure and will shorten the life of a new motor. Photograph all wiring before disconnecting. Verify rotation direction (CWLE — counter-clockwise looking from the lead end) before final assembly.
• Warranty & Shipping: 1-year OEM manufacturer warranty. In stock and ships same business day from our warehouse — order by 3PM local time for next-day delivery eligibility.

Compatibility: Direct OEM replacement for Carrier model PH12NA048000ADAA R-410A heat pump condensers. Also fits Bryant and Payne units sharing the HC37GE210 / HC38GE231 specification. Always verify voltage, HP, RPM, rotation, and shaft dimensions against your unit's data plate before ordering. Our HVAC parts specialists are available to confirm fitment — contact us before you order if you have any questions.