OEM Carrier Condenser Fan Motor 1/5 HP 208-230V 825 RPM for Model PH12NA042000ACAA

This OEM condenser fan motor is the factory-specified replacement for the Carrier PH12NA042000ACAA heat pump condenser unit, covering both OEM part numbers HC37GE210 and HC38GE231. The condenser fan motor drives airflow across the outdoor coil, dissipating heat during cooling mode and absorbing it during heating mode. When the motor fails, the outdoor unit will overheat and trip the high-pressure limit, causing the system to shut down entirely — often during peak summer or winter demand. Common failure symptoms include a humming condenser with no fan movement, intermittent shutdowns after 10–15 minutes of run time, or the fan blade spinning only when manually assisted.

• Specs: 1/5 HP | 208-230V, 60 Hz, 1-Phase | 825 RPM | 0.95A Full Load | Frame 48 | Clockwise Rotation (CWLE) | 0.5" Diameter × 1.5" Shaft | Closed Enclosure | Stud Mountable | Requires 7.5 MFD 370V run capacitor (sold separately — always replace capacitor when replacing motor)
• OEM vs Generic: This is a genuine Carrier OEM motor built to exact factory tolerances for the PH12NA042000ACAA. Aftermarket motors often deviate in shaft length, rotation, or winding resistance, leading to premature failure or compressor damage from inadequate airflow. OEM ensures compliance with all agency listings and active equipment warranties.
• Install Difficulty: 3/5 — Disconnect all power at the breaker and verify zero voltage before opening the unit. Tools needed: multimeter, 5/16" and 3/8" nut drivers, needle-nose pliers, and wire nuts. Photograph all wiring connections before disconnecting. Discharge or replace the run capacitor — never touch capacitor terminals without discharging first. Verify fan blade set-screw torque after installation.
• Warranty & Shipping: Backed by a 1-year OEM factory warranty. In stock and ships same business day from our warehouse. Free ground shipping on qualifying orders.

Compatibility: Directly fits Carrier model PH12NA042000ACAA heat pump condensers. Replaces OEM part numbers HC37GE210, HC37GE210A, HC37GE208A, HC38GE231. Verify horsepower, voltage, RPM, rotation, and shaft dimensions against your unit's data plate before ordering. Our fitment team is available to confirm compatibility before you buy.