OEM Carrier Condenser Fan Motor 1/5 HP 825 RPM for Model PH12NA042000ABAA

This is the factory OEM replacement condenser fan motor for the Carrier PH12NA042000ABAA heat pump. The condenser fan motor drives the outdoor fan blade to pull air across the coil, rejecting heat during cooling and absorbing heat during heating. When this motor fails, the outdoor unit may run briefly then trip on high-pressure lockout, the fan blade may spin slowly or not at all, or you may hear a loud hum from a seized motor winding. Left unaddressed, a failed condenser fan motor will rapidly damage the compressor due to heat build-up.

• Specs: 208/230V | 60 Hz | 1-Phase | 1/5 HP | 825 RPM | Frame 48 | CWLE Rotation | Shaft: 0.5" Diameter × 1.9" Long | Stud Mountable | Requires 7.5 MFD 370V Run Capacitor (sold separately)
• OEM vs Generic: OEM Carrier motors (HC37GE210 / HC38GE231) are wound to exact factory torque and speed tolerances, ensuring proper airflow across the coil. Generic motors often deviate in RPM or rotation direction, reducing system efficiency and voiding equipment warranties.
• Install Difficulty: 3/5 — Disconnect all power before servicing the outdoor unit. Tools needed: 5/16" and 3/8" nut drivers, blade screwdriver, needle-nose pliers, multimeter. Note wire colors and capacitor terminals before removal. Verify rotation direction (CWLE — counterclockwise when looking at the lead end) before energizing.
• Warranty: 1-year OEM factory warranty against defects. Orders placed before cutoff ship same business day from our warehouse.

Compatibility: Direct OEM replacement for Carrier model PH12NA042000ABAA heat pump condensing units. Cross-references OEM part numbers HC37GE210 and HC38GE231. Verify voltage, HP, RPM, rotation, and shaft dimensions against your unit's data plate before ordering. Need help confirming fitment? Our HVAC parts specialists verify compatibility before every order — call or chat today.