OEM Carrier Condenser Fan Motor 1/5 HP 825 RPM for Model PH12NA042000AAAA

This is the factory OEM condenser fan motor for the Carrier PH12NA042000AAAA R-410A residential heat pump condensing unit. The condenser fan motor draws ambient air across the outdoor coil and over the compressor, dissipating heat during cooling and transferring heat energy during heating operation. When this motor fails, the system will typically overheat, triggering high-pressure lockout, or the fan blade will simply stop spinning — leaving the compressor unprotected and the system unable to condition the space. A seized motor, slow start, intermittent operation, or failure to start are all telltale signs this part needs replacement. OEM part numbers: HC37GE210 (primary) and HC38GE231 (alternate/superseded).

• Specs: 1/5 HP | 208-230V | 60 Hz | 825 RPM | 0.95 A | Single-Phase | Frame 48 | CWLE Rotation | 0.5" Diameter × 1.9" Shaft | Stud Mountable | Closed Enclosure | Requires 7.5 MFD 370V run capacitor (sold separately)
• OEM vs Generic: This is a genuine Carrier factory-authorized part, built to exact motor tolerance, thermal protection rating, and rotation specification for the PH12NA042000AAAA platform. Aftermarket motors frequently deviate in shaft length, rotation direction, or MFD requirement — any mismatch risks fan blade contact, compressor damage, or voiding your equipment warranty.
• Install Difficulty: 3/5 — Disconnect and lock out power at the disconnect box before opening the cabinet. Tools needed: nut driver set, needle-nose pliers, multimeter, and a fan blade puller. Photograph all wiring and blade orientation before removal. Always replace the run capacitor at the same time as the motor — a failed capacitor is often the root cause of motor failure. Capacitor is NOT included.
• Warranty: 1-year OEM manufacturer warranty against defects in materials and workmanship. Ships same business day from our stocked warehouse.

Compatibility: Engineered specifically for the Carrier PH12NA042000AAAA R-410A residential heat pump condensing unit. Also cross-references HC37GE210A and HC37GE208A as superseded part numbers. Verify voltage, HP, RPM, rotation, and shaft diameter against your unit's data plate before installation. Not sure if this is the right motor? Contact our fitment team before ordering — we verify compatibility at no charge.