OEM Carrier Condenser Fan Motor 1/5 HP 208-230V 825 RPM for Model PH12NA02400GABAA

This is the genuine OEM factory-specified condenser fan motor for the Carrier PH12NA02400GABAA heat pump / air conditioner. Located in the outdoor unit, this motor drives the condenser fan blade that pulls ambient air across the coil to reject heat from the refrigerant. When it fails, the outdoor unit may run briefly then trip on high-pressure lockout, or the fan may simply not spin — leaving the compressor to overheat and shut down. Replacing this motor with the correct OEM unit restores factory airflow, efficiency, and compressor protection.

• Specs: 1/5 HP | 208-230V | 60 Hz | Single-Phase | 825 RPM | 0.95–1.00A FLA | Frame 48 | CWLE Rotation | 0.5" Diameter × 1.9" Shaft | Stud Mountable | Requires 7.5 MFD 370V Run Capacitor (sold separately)
• OEM vs Generic: OEM motors are wound to exact factory tolerances for speed, torque, and thermal protection. Generic motors often use inferior winding insulation and looser RPM tolerances, which can accelerate compressor wear and void system warranties. Always replace with OEM when the unit is still under manufacturer or extended warranty.
• Install Difficulty: 3/5 — Requires safely disconnecting and locking out 208-230V power before beginning. Tools needed: multimeter, 5/16" and 1/4" nut drivers, wire stripper, needle-nose pliers. Always photograph existing wiring before disconnecting. Inspect and replace the run capacitor at the same time — a weak or failed capacitor is a leading cause of premature motor failure.
• Warranty & Shipping: 1-year OEM factory warranty against defects. In stock and ships same business day from our warehouse.

Compatibility: Designed as the direct OEM replacement for Carrier model PH12NA02400GABAA using part numbers HC37GE210 and HC38GE231. Also replaces HC37GE210A and HC37GE208A. Verify voltage, HP, and rotation on your unit's data plate before ordering. Our fitment team is available to confirm compatibility before you buy.