OEM Carrier Condenser Fan Motor 1/5 HP 208-230V 825 RPM for Model PH12NA024000ADAA

This is the factory OEM replacement condenser fan motor for the Carrier PH12NA024000ADAA heat pump and R-410A air conditioning system. The condenser fan motor drives the outdoor fan blade, pulling air across the condenser coil to reject heat. When this motor fails, the outdoor unit may run briefly before tripping on high-pressure lockout, produce a loud hum with no fan movement, or shut down entirely — leaving you without cooling or heating. OEM part numbers covered: HC37GE210 and HC38GE231.

• Specs: 1/5 HP | 208-230V AC | 60 Hz | Single-phase | 825 RPM | 0.95A FLA | Frame 48 | Closed enclosure | CWLE rotation | 0.5" diameter × 1.9" shaft | Stud mountable | Requires 7.5 MFD 370V run capacitor (sold separately)
• OEM vs Generic: This factory-matched OEM motor is wound and balanced to Carrier's exact tolerances, ensuring correct airflow, amperage draw, and vibration levels. Generic motors often deviate in rotation, shaft length, or MFD requirement — risking premature failure or compressor damage from reduced airflow.
• Install difficulty: 3/5 — Disconnect power at the breaker and capacitor before touching any terminals. Tools needed: 5/16" and 3/8" nut driver, wire stripper, needle-nose pliers, multimeter, and a marker to label wires before disconnecting. Always inspect the fan blade for cracks or imbalance before reinstalling — a damaged blade accelerates bearing failure. Strongly recommended: replace the 7.5 MFD 370V run capacitor at the same time.
• Warranty: 1-year OEM factory warranty. In stock and ships same business day from our warehouse.

Compatibility: Designed as a direct OEM drop-in replacement for Carrier model PH12NA024000ADAA. Also replaces superseded Carrier part numbers HC37GE210A and HC37GE208A. Verify voltage, RPM, rotation, and shaft dimensions against your unit's data plate before ordering. Our fitment team is available to confirm compatibility before you buy.