OEM Carrier Condenser Fan Motor HC31GE232 1/12 HP 208-230V for Model PH12NA018000AGAA

This is the OEM factory-authorized condenser fan motor (part number HC31GE232) for the Carrier PH12NA018000AGAA heat pump system. The condenser fan motor drives the outdoor fan blade to expel heat from the refrigerant coil. When this motor fails, the outdoor unit will run with no airflow, causing the system to overheat, trip the high-pressure limit, and shut down — or the fan simply won't spin at all. Replacing it with the correct OEM part ensures your system returns to factory-rated performance.

• Specs: 1/12 HP | 208-230V | 1100 RPM | 0.5A | 1-Phase | 60 Hz | Frame 39 | 0.5" Shaft Diameter | 1.5" Shaft Length | CW rotation (shaft-end view)
• OEM vs Generic: This is a genuine Carrier Factory Authorized Part (GE/Genteq model 5KCP39BGS162S), built to exact factory tolerances. Generic motors often deviate in RPM and rotation direction, leading to poor airflow performance and premature failure. Also replaces HC31GE232A, HC31GE231, HC32GE230, HC31GE230, and HC31GE230A.
• Install difficulty: 3/5 — Disconnect power and verify capacitor discharge before handling. Tools needed: nut driver set, multimeter, wire stripper, and blade puller (fan blade is press-fit). Always photograph wiring and blade pitch angle before removal. Pro tip: replace the run capacitor at the same time — a failing capacitor is the #1 cause of premature motor burnout.
• Warranty: Covered by Carrier's OEM replacement warranty. Ships same business day from our climate-controlled warehouse.

Compatibility: Direct OEM replacement for Carrier model PH12NA018000AGAA heat pump condensers. Verify HP, voltage, RPM, and shaft specs on your unit's data plate before ordering. Our HVAC parts specialists are available to confirm fitment — contact us before you order if you have any questions.