OEM Carrier Condenser Fan Motor HC37GE210 for Model PH11JA036000AAAA

This is the factory-specified OEM condenser fan motor (part number HC37GE210) for the Carrier PH11JA036000AAAA heat pump condenser unit. The condenser fan motor drives the outdoor fan blade to pull air across the condenser coil, rejecting heat and maintaining proper refrigerant pressure. When this motor fails, the outdoor unit runs with no fan movement, causing the system to trip on high-pressure lockout, overheat the compressor, or simply blow warm air. Common failure symptoms include a humming sound with no fan spin, intermittent shutdowns on hot days, or a seized motor shaft.

• Specs: Part No. HC37GE210 | 1/5 HP | 208-230V | Single-phase | Thermally protected | Factory-matched rotation and shaft diameter for Carrier PH11JA036000AAAA
• OEM vs Generic: This OEM motor is wound and balanced to Carrier's exact factory specifications, ensuring correct CFM airflow across the coil. Generic aftermarket motors frequently deviate in RPM and rotation direction, risking compressor damage and voiding equipment warranties.
• Install Difficulty: 3/5 — Requires disconnecting power at the disconnect box and discharging any residual voltage. Tools needed: nut driver set, wire stripper, multimeter, and capacitor discharge tool. Note the fan blade pitch and motor rotation (typically CCW when viewed from shaft end) before removal. Reuse the existing run capacitor only if it tests within spec.
• Warranty: 1-year OEM manufacturer warranty. In-stock and ships same business day from our warehouse.

Compatibility: Engineered specifically for Carrier model PH11JA036000AAAA heat pump condensers. Always verify HP, voltage, RPM, rotation, and shaft diameter against your unit's data plate before ordering. Our technical team is available to confirm fitment — contact us before you order if you have any questions.