OEM Carrier 2-Pole Contactor 24V Coil for Model CSA0300M5Y — HN53CD209
This is the factory OEM replacement contactor (part number HN53CD209) for the Carrier CSA0300M5Y split-system condenser. The contactor is a high-voltage relay that receives a 24V signal from the thermostat and closes to deliver 240V line power to the compressor and condenser fan motor. When the contactor fails — due to pitted contacts, a welded contactor, or a burned coil — the system will either refuse to start, hum without running, or run continuously without shutting off.
-
Specs: 2-pole configuration | 24V AC coil voltage | 30A contact rating | 240V load voltage | Direct OEM replacement matching factory specifications for Carrier CSA0300M5Y
-
OEM vs Generic: This OEM contactor uses factory-grade silver-alloy contacts engineered for the exact duty cycle of the CSA0300M5Y. Generic contactors often use lower-grade contact materials that pit and fail faster under compressor inrush current loads.
-
Install difficulty: 3/5 — Requires shutting off power at the disconnect and breaker before beginning work. Tools needed: flathead and Phillips screwdrivers, needle-nose pliers, multimeter, and wire labels or tape. Photograph all wiring connections before removing any wires. Test coil voltage (24V) and contact continuity after installation.
-
Warranty: 1-year OEM factory warranty. In stock and ships same business day from our warehouse when ordered before 3PM local time.
Compatibility: Engineered as a direct OEM replacement for the Carrier CSA0300M5Y condenser unit. Always verify your existing contactor's pole count, coil voltage, and amperage rating against your unit's data plate before ordering. Our parts specialists are available to confirm fitment — contact us before you order if you have any questions.