OEM Carrier Condenser Fan Motor HC32GR221 for Model CH17NA02400GABAA
This is the factory OEM condenser fan motor (part number HC32GR221) for the Carrier CH17NA02400GABAA split-system air conditioner. The condenser fan motor drives the outdoor fan blade to pull air across the condenser coil, rejecting heat from the refrigerant. When the motor fails, the system will overheat, trigger high-pressure lockout, or simply blow warm air — and in some cases the unit will shut down entirely to protect the compressor from damage. Replacing it with an OEM-matched unit restores proper airflow and system efficiency immediately.
-
Specs: OEM Part HC32GR221 | Matched HP, RPM, voltage, and shaft diameter for Carrier CH17NA02400GABAA | Factory-correct rotation direction and mounting configuration | Permanently lubricated sleeve or ball bearings per factory spec
-
OEM vs Generic: OEM motors ship with the exact HP rating, rotation direction, and wiring harness configuration Carrier specifies. Generic replacements often require rotation reversal, shaft trimming, or bracket modifications — adding time and risk of improper airflow that stresses the compressor.
-
Install difficulty: 3/5 — Disconnect power at the breaker and capacitor before removing any wiring. Tools needed: 1/4" and 5/16" nut drivers, wire stripper, multimeter, and blade-tip screwdriver. Note and photograph all wiring connections and fan blade pitch orientation before disassembly. Capacitor discharge is mandatory before touching motor terminals.
-
Warranty: 1-year OEM factory warranty against defects in materials and workmanship. Orders placed before cutoff ship the same business day from our climate-controlled parts warehouse.
Compatibility: Engineered and factory-matched for the Carrier CH17NA02400GABAA condensing unit. Always confirm HP rating, shaft diameter, RPM, and rotation direction against your unit's data plate and existing motor label before ordering. Need help verifying fitment? Our HVAC parts specialists confirm compatibility before your order ships — no guesswork required.