OEM Carrier 2-Pole Contactor 24V Coil for Model CA13NA02400GAAAA — HN51KC024
This is the OEM factory-specified contactor (part number HN51KC024) for the Carrier CA13NA02400GAAAA split-system air conditioner. The contactor acts as the high-voltage relay that completes the circuit between the disconnect and your compressor and condenser fan motor whenever the thermostat calls for cooling. When the contactor fails — due to pitted or burned contacts, a stuck plunger, or a failed 24V coil — the outdoor unit simply will not energize, leaving you with warm air and a running indoor blower but no cooling at the condenser.
-
Specs: 2-pole configuration | 24V AC coil voltage | Factory-rated amperage for CA13NA02400GAAAA compressor load | OEM part number HN51KC024 — direct factory match, no modifications required
-
OEM vs Generic: OEM contactors feature silver-alloy contact tips with tighter arc-suppression tolerances than generic alternatives. Generic contactors often use lower-grade contact material that pits faster under repeated inrush current, leading to premature failure and potential compressor damage.
-
Install Difficulty: 2/5 — Always shut off power at the disconnect and verify zero voltage with a multimeter before touching any wiring. Photograph all wiring connections before removal. Tools needed: flathead and Phillips screwdrivers, 1/4" nut driver, needle-nose pliers, non-contact voltage tester. Average replacement time: 20–30 minutes.
-
Warranty: 1-year OEM factory warranty against defects in materials and workmanship. In-stock units ship same business day from our warehouse.
Compatibility: Engineered and factory-matched for the Carrier CA13NA02400GAAAA 2-ton single-stage split-system condenser. Always confirm your unit's data plate voltage, pole count, and amperage rating match before installation. Our parts specialists are available to verify fitment before you order — order with confidence and get your system back online fast.