OEM Carrier 2-Pole Contactor for Model C4850C50AW03591
This OEM replacement contactor is the factory-specified high-voltage relay for the Carrier C4850C50AW03591 packaged unit. The contactor acts as the main electrical switch that closes when the thermostat calls for cooling, allowing line voltage to reach the compressor and condenser fan motor. When the contactor fails — due to pitted or welded contacts, a burned coil, or worn contact surfaces — the system will either refuse to start entirely, run continuously without cycling off, or trip the breaker. Replaces OEM part numbers HN53CB115 and HN53HF122.
-
Specs: 2-pole configuration | 24V coil voltage | Factory-rated amperage for Carrier C4850C50AW03591 packaged unit | Direct OEM replacement with matched contact rating and coil pull-in voltage
-
OEM vs Generic: OEM contactors use silver-alloy contact tips rated for the exact current load of this unit. Generic contactors often use lower-grade contact materials that pit faster under the high inrush current of compressor startup, leading to premature failure and potential compressor damage.
-
Install difficulty: 2/5 — Always disconnect power at the disconnect box and verify zero voltage with a multimeter before touching any wiring. Tools needed: flathead and Phillips screwdrivers, 1/4" nut driver, needle-nose pliers, multimeter. Photograph all wire connections before removal. Swap wires one at a time to avoid miswiring.
-
Warranty: 1-year OEM factory warranty against defects in materials and workmanship. Orders placed before cutoff ship same business day from our climate-controlled warehouse.
Compatibility: Designed for Carrier model C4850C50AW03591 packaged unit. Cross-references OEM part numbers HN53CB115 and HN53HF122. Verify pole count, coil voltage, and amperage rating on your unit's data plate or existing contactor before ordering to ensure correct fitment. Our technical team is available to confirm compatibility before you buy.