OEM Carrier Condenser Fan Motor 1/3 HP 460V 840 RPM for Model 0BEV060115AC

This is the factory-specified OEM condenser fan motor for the Carrier 0BEV060115AC commercial condensing unit. The condenser fan motor drives the outdoor fan blade to pull air across the condenser coil, expelling heat absorbed from the refrigerant and enabling the refrigeration cycle to repeat. When this motor fails, the condenser coil overheats rapidly, triggering high-pressure cutouts, compressor lockout, or complete system shutdown - often within minutes of a call for cooling. Common failure symptoms include a seized or humming motor that won't spin, intermittent tripping on the high-pressure switch, or visible burn marks on the motor windings.

• Specs: 1/3 HP | 460V | 840 RPM | 1.1 FLA | Single Phase | CCW Rotation (shaft up) | 48Y Frame | 5-5/8" diameter | 3.25" shaft extension | 3-wire leads | GE/Genteq 5KCP39SGR105AS equivalent | Also replaces HC43GE460A
• OEM vs Generic: This OEM motor is manufactured to exact Carrier factory tolerances for airflow CFM, bearing load, and thermal protection thresholds. Generic aftermarket motors often use lower-grade bearings and looser winding tolerances, shortening service life in high-ambient commercial applications. For a 460V commercial unit, OEM specification is especially critical - mismatched amperage or RPM will void compressor warranties.
• Install Difficulty: 3/5 - Requires licensed electrician for 460V commercial work. Disconnect and lockout/tagout 3-phase power before opening the unit. Tools needed: multimeter, 5/16" and 3/8" nut drivers, blade puller, wire connectors. Confirm CCW rotation direction (shaft up) before wiring. Always replace the run capacitor when replacing the motor on high-hour equipment.
• Warranty: 1-year OEM factory warranty. Ships same business day from our climate-controlled warehouse. Carefully packaged to prevent motor winding damage in transit.

Compatibility: Designed as a direct OEM replacement for Carrier model 0BEV060115AC commercial condensing equipment. Cross-references: HC43GE460A, GE/Genteq 5KCP39SGR105AS. Verify voltage (460V), HP (1/3), RPM (840), and rotation (CCW) against your unit's data plate before ordering. Not for use on 208/230V residential equipment. Have a question about fitment? Our technical team confirms compatibility before you order - no guesswork.