OEM Carrier Condenser Fan Motor 1HP 460V 3-Phase for Model 09DPS0309A

This is the factory-specified OEM condenser fan motor for the Carrier 09DPS0309A commercial condensing unit, carrying OEM part number HD52AR461 (superseded by HD52AZ461). The condenser fan motor drives the outdoor fan blade, pulling ambient air across the condenser coil to reject heat from the refrigerant circuit. When it fails, the condenser loses its ability to shed heat - resulting in high-pressure lockouts, compressor overheating, nuisance trips, or complete system shutdown on hot days. On 3-phase commercial equipment, motor failures are especially critical: a single failed motor can unbalance the refrigerant circuit and cause compressor damage within hours if not addressed.

• Specs: 1 HP | 460/400 VAC | 3-Phase | 1140 RPM | 56Y Frame | CCW Rotation | 3.3A Full Load | 50 Hz | OEM Part# HD52AR461 (current replacement: HD52AZ461)
• OEM vs Generic: OEM motors are wound and balanced to exact Carrier factory tolerances, ensuring correct airflow, RPM stability, and phase balance on 3-phase systems. Aftermarket alternatives often deviate in slip RPM and frame dimensions, risking fan blade interference and premature bearing failure in commercial duty cycles.
• Install difficulty: 3/5 - Requires licensed commercial HVAC technician. Lock out / tag out all power before servicing. Tools needed: multimeter, clamp meter (verify phase balance post-install), 1/2" nut driver, shaft puller for fan blade removal. Verify rotation direction (CCW viewed from shaft end) before energizing. Check amp draw against nameplate after startup.
• Warranty: 1-year OEM factory warranty on parts. Ships same business day from our warehouse when ordered before 3 PM local time.

Compatibility: Factory-matched replacement for Carrier model 09DPS0309A commercial condensing unit. Note: HD52AR461 has been superseded by HD52AZ461 - both part numbers are fulfilled with the current factory replacement. Always verify voltage (460V), phase (3Ph), HP (1), and RPM (1140) against your unit's data plate before ordering. Our HVAC parts specialists are available to confirm fitment prior to purchase - contact us before you order.