OEM Carrier Condenser Fan Motor 1.25 HP 460V 850 RPM 3-Phase for Model 09DPM1309

This OEM condenser fan motor (part# HD52AR465, superseded by HD52AZ465) is the factory-specified replacement for the Carrier 09DPM1309 commercial condensing unit. The condenser fan motor drives the fan blade that pulls air across the condenser coil, rejecting heat from the refrigerant circuit. When it fails, the unit will overheat, trip on high-pressure lockout, or shut down entirely — often within minutes of startup on a warm day. Prompt replacement with the correct OEM motor protects the compressor from thermal damage.

• Specs: 1.25 HP (1-1/4 HP) | 460V | 850 RPM | 3-Phase | Clockwise rotation | Factory Authorized Part — meets exact Carrier engineering tolerances
• OEM vs Generic: OEM motors are wound and balanced to factory spec, ensuring correct airflow CFM and thermal protection thresholds. Generic motors can run off-speed or with insufficient thermal cutouts, risking compressor failure.
• Install difficulty: 3/5 — Requires disconnecting 460V 3-phase power at the disconnect box before any work. Tools needed: multimeter, wire nuts or terminal connectors, strap wrench to remove fan blade, and torque wrench to set blade hub set screw. Photograph wiring before disconnecting. Verify rotation direction before final startup.
• Warranty: 1-year OEM factory warranty. Ships same business day from our warehouse in original manufacturer packaging.

Compatibility: Designed for Carrier model 09DPM1309 commercial condensing equipment. Note: HD52AR465 has been superseded by HD52AZ465 — both part numbers are cross-compatible for this application. Always verify voltage, HP, RPM, and rotation on your unit's data plate before ordering. Our team is available to confirm fitment prior to purchase.