OEM Carrier Condenser Fan Motor 1.25 HP 460V 3-Phase 850 RPM for Model 09DPM1156

This OEM condenser fan motor (part number HD52AR465, factory-superseded by HD52AZ465) is the Carrier-specified replacement for the 09DPM1156 commercial rooftop and packaged HVAC unit. The condenser fan motor drives the outdoor fan blade to exhaust heat from the refrigerant coil. When it fails, the condenser coil overheats, triggering high-pressure lockout, compressor short-cycling, or complete system shutdown — particularly under peak summer load conditions. Replacing it with the correct OEM motor restores proper airflow, refrigerant pressure balance, and system efficiency.

• Specs: 1.25 HP | 460V | 3-Phase | 850 RPM | 56Y Frame | 3/4" Shaft Diameter | 4-1/8" Shaft Length | 8 Poles | 2.8 Amps | Insulation Class F | Thermally Protected | Continuous Air Over (CAO) rated
• OEM vs Generic: This Factory Authorized Parts motor is wound and balanced to Carrier's exact specifications, ensuring correct airflow CFM, correct amp draw, and compatibility with the unit's motor contactor and control board. Generic aftermarket motors often differ in rotation direction, shaft length, or amp draw — risking repeated failures or voided equipment warranties.
• Install difficulty: 3/5 — Commercial 3-phase motor swap requires lockout/tagout (LOTO) procedures, a clamp meter to verify phase balance, and confirmation of rotation direction before energizing. Tools needed: 1/2" and 9/16" wrenches, multimeter, clamp meter, wire nuts or terminal kit. Always photograph all wiring before disconnecting leads.
• Warranty: 1-year OEM factory warranty. Ships same business day from our warehouse — critical for commercial rooftop repairs where equipment downtime directly impacts building operations.

Compatibility: Designed for Carrier model 09DPM1156 commercial packaged/rooftop units. OEM part HD52AR465 has been factory-superseded by HD52AZ465 — both are fulfilled as the current production unit. Verify voltage (460V), phase (3-Ph), and HP (1.25) on your unit's motor data plate before ordering. Our team is available to confirm fitment — contact us before you order.