OEM Carrier Contactor 24V Coil 2-Pole for Model 09DK084500

This OEM contactor (part number HN53CB115) is the factory-specified high-voltage switching relay for the Carrier 09DK084500. The contactor acts as the main power switch between your thermostat's 24V control signal and the high-voltage supply feeding the compressor and condenser fan. When the contactor fails, the most common symptoms are an air conditioner that won't turn on despite the thermostat calling for cooling, a unit that hums at the outdoor cabinet without the compressor engaging, or pitted/burned contacts causing erratic cycling.

• Specs: 24V AC coil voltage | 2-pole design | High-amperage contact rated for compressor loads | OEM-matched contact gap and spring tension for reliable pull-in
• OEM vs Generic: This is a genuine Carrier OEM part (HN53CB115). OEM contactors use factory-spec contact alloy and coil windings, ensuring consistent pull-in voltage and longer service life versus aftermarket substitutes that may chatter or fail prematurely under load.
• Install Difficulty: 3/5 — Always disconnect power at the breaker and verify zero voltage with a multimeter before touching any terminals. Tools needed: flathead and Phillips screwdrivers, 1/4" nut driver, needle-nose pliers, multimeter. Photograph all wiring connections before removal.
• Warranty: 1-year OEM factory warranty. Orders placed by cutoff ship same business day from our warehouse.

Compatibility: Designed for the Carrier 09DK084500. Always verify coil voltage and pole count on your unit's data plate before ordering. Not sure it's the right fit? Our HVAC parts specialists confirm fitment before you buy — reach out via chat or phone.