OEM Carrier 3-Pole Contactor 25A 115V Coil for Model 09DK084100

This is the genuine OEM Carrier contactor (part number HN53CB115), factory-specified for the Carrier 09DK084100 commercial condensing unit. The contactor is a high-voltage electromechanical relay that controls the flow of power to your compressor and other load-side components. When the 24V control signal energizes the coil, the contactor closes its poles and delivers line voltage to the load. A failed contactor typically presents as a unit that won't start, chatters audibly, draws excessive amperage, or shows pitted/burnt contact surfaces upon inspection.

• Specs: 3-Pole configuration | 25A Full Load Amperage (FLA) | 115V coil voltage | Direct OEM replacement for Carrier part HN53CB115 | Cross-references: HN53TB115, HN52KC016
• OEM vs Generic: This factory OEM unit meets Carrier's exact contact gap, spring tension, and coil impedance specifications. Aftermarket contactors often use thinner contact tips that pit faster under compressor inrush current, shortening service life significantly.
• Install Difficulty: 3/5 — Always disconnect and lock out power before servicing. Tools needed: flathead and Phillips screwdrivers, needle-nose pliers, multimeter, and appropriate PPE. Label all wiring with tape before removal. Verify coil voltage matches your control circuit before energizing.
• Warranty: 1-year OEM factory warranty. Ships same business day from our stocked warehouse.

Compatibility: Designed for the Carrier 09DK084100 commercial condensing unit. Verify pole count, FLA rating, and coil voltage on your existing contactor's data label before ordering. Our HVAC parts specialists are available to confirm fitment — contact us before you buy if you have any questions. Order today and your part ships the same business day.