OEM Carrier Condenser Fan Motor 1HP 208-230/460V 3-Phase for Model 09DK064900

This OEM condenser fan motor is the factory-specified replacement for the Carrier 09DK064900 commercial condensing unit. The condenser fan motor drives airflow across the condenser coil, rejecting heat from the refrigerant and allowing the system to maintain rated capacity. When this motor fails, the condenser loses heat rejection, leading to high head pressure, compressor overload trips, and ultimately a complete loss of cooling. Common failure symptoms include a seized or non-spinning fan blade, the compressor shutting off on high-pressure lockout, or visible heat damage around the motor housing.

• Specs: 1 HP | 208-230/460V | 3-Phase | 1140 RPM | Frame 56 | 6.5/3.3A Full Load | CCW Rotation | 5/8" Shaft | Thermally Protected | Insulation Class F | Continuous Air Over (CAO) rated
• OEM Part Numbers: HD52AK001 (primary), HD52AK652, HD52AK653, HD52AK654, HD52AK002. Current superseding OEM part: HD52AZ001 — a direct drop-in replacement shipped in its place. All variants are factory-matched to Carrier 09DK064900 specifications.
• OEM vs Generic: OEM motors are wound and balanced to exact Carrier factory tolerances, preserving published efficiency ratings, certified sound levels, and unit certifications. Generic 3-phase motors often deviate in rotation direction, shaft length, or amperage draw — any mismatch on a commercial condensing unit can trip overloads or void refrigerant warranty coverage.
• Install Difficulty: 3/5 — Requires licensed HVAC/R technician for commercial 3-phase wiring. Tools needed: multimeter (verify phase rotation before energizing), strap wrench, shaft puller for fan blade removal, torque wrench, and lockout/tagout equipment. Always verify CCW rotation and confirm fan blade pitch and balance before commissioning. An unbalanced blade can cause premature motor failure.
• Warranty: 1-year OEM factory warranty. Ships same business day from our climate-controlled warehouse. Oversized motor — freight shipping may apply; confirmed at checkout.

Compatibility: Designed for Carrier model 09DK064900 commercial condensing unit. Also cross-references to Bryant and BDP commercial platforms sharing the HD52AK series motor specification. Verify voltage supply (208-230V or 460V tap), phase configuration, and rotation direction on your unit's data plate before ordering. Not sure? Our technical team verifies fitment at no charge — contact us before placing your order.