OEM Carrier Condenser Fan Motor with Rain Guard — 1/2 HP 1075 RPM for Model 09DE016520

This is the OEM factory-specified condenser fan motor with integrated rain guard for the Carrier 09DE016520 commercial condensing unit. The condenser fan motor draws ambient air across the condenser coil and over the compressor, dissipating heat and maintaining system refrigerant pressures within design range. When this motor fails, the compressor overheats, high-pressure safeties trip, and the system enters a no-cool lockout — often within minutes of a call. Common failure symptoms include the fan blade not spinning on startup, intermittent shutdowns on hot days, or a seized motor shaft that won't turn freely by hand.

• Specs: 1/2 HP | 1075 RPM | 208/230/460V | 60 Hz | 4.6A | Single Phase | 48Y Frame | CCW Rotation | 1/2" x 2.50" Shaft | Ball Bearing | Vertical Shaft-Up Mount | Rain Guard Included | GE/Genteq 5KCP39SGL288AS equivalent
• OEM vs Generic: This OEM motor is wound to exact Carrier factory tolerances for amperage draw, rotation direction, and shaft dimensions — ensuring a true drop-in fit. Generic motors may deviate in shaft length, rotation, or frame size, requiring field modifications that void equipment warranties and risk premature failure.
• Install difficulty: 3/5 — Disconnect and lock out power before beginning. Tools needed: multimeter, 5/16" and 1/4" nut drivers, wire strippers, and a capacitor discharge tool. Always discharge the run capacitor before handling motor leads. Photograph all wiring connections before removal. Note: A matched 7.5 µF 440 VAC run capacitor (sold separately) is strongly recommended at replacement to prevent accelerated motor wear.
• Warranty: 1-year OEM factory warranty against defects in materials and workmanship. Ships same business day from our warehouse.

Compatibility note: Engineered as a direct OEM replacement for Carrier model 09DE016520. HC44VL852 has been superseded in current production by HC44VQ852; this listing covers both the original and current supersession. Also fits Bryant and Payne units sharing the same motor specification. Always verify HP, RPM, voltage, rotation, and shaft dimensions against your unit's data plate before ordering. Have questions about fitment? Our HVAC parts specialists confirm compatibility before you buy — contact us today and ship your repair the same day.