OEM Carrier Discharge Gas Thermostat HN68GA295 for Model 07ED044411

This OEM discharge gas thermostat (part number HN68GA295) is the factory-authorized replacement for the Carrier 07ED044411 chiller/commercial HVAC unit. Mounted on the compressor discharge line, this thermostat continuously monitors refrigerant discharge gas temperatures and opens the control circuit when temperatures exceed safe operating thresholds — protecting your compressor from catastrophic overheating damage. When it fails or trips permanently, the unit will typically lock out on a high-discharge-temperature fault, refuse to start, or shut down shortly after initiating a cooling cycle.

• Part Number: HN68GA295 | Also referenced as HN-68GA-295 | Factory Authorized Carrier OEM part | Designed specifically for Carrier commercial chiller and packaged refrigeration applications
• OEM vs Generic: As a safety-critical compressor protection device, OEM specification is strongly recommended. Factory-calibrated trip points ensure the compressor is protected at the exact temperature thresholds engineered for this platform — aftermarket substitutes may use imprecise setpoints that either fail to protect or cause nuisance trips.
• Install Difficulty: 3/5 — Requires recovering refrigerant charge before accessing the discharge line on most configurations. Tools needed: refrigerant recovery unit, manifold gauges, torque wrench, and leak detection equipment. EPA 608 certification required for refrigerant handling. Always confirm system is de-energized and depressurized before replacing.
• Warranty: 1-year OEM factory warranty. In stock and ships same business day from our warehouse when ordered before cutoff.

Compatibility: Engineered as the OEM replacement for Carrier model 07ED044411 commercial HVAC and chiller applications. Verify your unit's data plate and existing part number before ordering to ensure correct fitment. This is a high-value commercial component — our team is available to verify compatibility before you purchase.