OEM Carrier 3-Pole Contactor 115V 63A HN53HF115 for Model 07EB033401

This is the factory-specified OEM replacement contactor for the Carrier 07EB033401 commercial condensing unit. The contactor is the high-voltage switching relay that energizes the compressor and condenser fan motor every time a cooling call is made. When the contactor fails — due to pitted contacts, a burned coil, or a welded set of poles — the unit will either refuse to start entirely, run continuously without shutting off, or trip the breaker repeatedly. This 3-pole, 115V coil design is purpose-built for the higher-amperage demands of Carrier's commercial reciprocating compressor platforms.

• Specs: 3-Pole | 63A (FLA) | 115V AC Coil | 50/60 Hz | OEM Part Number HN53HF115 | Replaces HN53AF101, HN53AE101, HN53LE200, HN53AE103, HN53LF200, HN53AF103, HN53LF205, HN53LF226
• OEM vs Generic: This is a genuine Carrier OEM contactor — not an aftermarket substitute. OEM contacts are rated to exact arc-interrupting capacity for this compressor load. Generic 3-pole contactors often use lighter silver-alloy contacts that pit prematurely under high inrush current, leading to premature failure.
• Install difficulty: 3/5 — Requires full lockout/tagout of all power before service. A 3-pole contactor carries line voltage on all three phases; never work on it energized. Tools: flathead and Phillips screwdrivers, needle-nose pliers, multimeter (verify coil continuity and contact resistance), and a camera or phone to photograph all wiring before removal.
• Warranty: 1-year OEM factory warranty against defects. Ships same business day from our warehouse when ordered before cutoff.

Compatibility: Confirmed fit for Carrier model 07EB033401 commercial condensing units. Also compatible with a wide range of Carrier, Bryant, and Payne commercial models in the 06EV, 06EW, 07EB, 07ED, and 30GA series — verify your unit's data plate coil voltage and pole count before ordering. Our parts team is available to confirm fitment before you buy.