OEM Carrier 3-Pole Contactor 63A 115V — HN53HF115 for Model 07EB033101

This is the factory OEM replacement contactor for the Carrier 07EB033101 commercial HVAC unit. The contactor is a high-voltage relay that physically closes the circuit to energize the compressor and/or condenser fan motor each time the thermostat calls for cooling. When a contactor fails — through pitted or burned contacts, a weak coil, or contact welding — the system will either fail to start entirely, run continuously without shutting off, or trip a breaker on startup. Replacing the contactor promptly prevents compressor burnout and costly downstream failures.

• Specs: 3-Pole | 63A (ampere rating) | 115V AC coil | 50/60 Hz | OEM Part Number HN53HF115 | Replaces legacy part numbers HN53AF101, HN53AE101, HN53LE200, HN53AE103, HN53LF200, HN53AF103, HN53LF205, HN53LF226
• OEM vs Generic: This factory-matched OEM contactor meets Carrier's exact coil voltage and ampacity specs. Aftermarket substitutes frequently use lower-grade contact materials, increasing the risk of arcing, contact welding, and premature failure under full-load conditions.
• Install Difficulty: 3/5 — Always shut off power at the disconnect and verify zero voltage with a multimeter before touching any wiring. This is a 115V coil, 3-pole unit — photograph all wiring connections before removal. Tools needed: flathead and Phillips screwdrivers, 1/4" nut driver, needle-nose pliers, multimeter. Due to the high amperage rating, confirm all load-side lugs are torqued to spec per the wiring diagram.
• Warranty: 1-year OEM factory warranty. Ships same business day from our warehouse — order by 3 PM local time for same-day dispatch.

Compatibility: Fits Carrier model 07EB033101 commercial HVAC equipment. Verify coil voltage (115V) and pole count (3-pole) against your unit's wiring diagram and data plate before ordering. Not sure it fits? Our technical team confirms fitment before you buy — contact us before placing your order.