OEM Carrier 3-Pole Contactor 60 Amp 120V Coil — HN53HF122 for Model 07EB027641

This is the genuine OEM Carrier contactor (part number HN53HF122), factory-specified for the Carrier 07EB027641 commercial HVAC unit. A contactor is the high-voltage switching relay that energizes the compressor and fan motor circuits each time the thermostat calls for cooling or heating. When it fails — due to worn contacts, a burned coil, or welded contacts — the system will either fail to start entirely, run continuously without cycling off, or trip breakers under abnormal load. Replacing a failed contactor promptly prevents cascading damage to your compressor and fan motor.

• Specs: 3-Pole configuration | 60 FLA (75A res rated) | 120V AC coil voltage | Replaces OEM cross-references: 43-040-131, HN53HE122, 43-040-130, HN53HF120, HN53LF212, HN53LE226, Siemens 42EF35AFAKA
• OEM vs Generic: This genuine Carrier OEM contactor is manufactured to exact factory contact gap, spring tension, and coil impedance specifications. Aftermarket contactors often use thinner contact material and lower-grade coil windings, resulting in premature arcing, coil burnout, and shortened service life — particularly under the heavy-load cycling demands of commercial equipment.
• Install difficulty: 3/5 — High-voltage component. Always disconnect and lock out power at the disconnect box before servicing. Tools needed: flathead and Phillips screwdrivers, needle-nose pliers, multimeter (for coil continuity check), and a camera or phone to photograph all wiring before disconnecting terminals. Verify coil voltage and pole configuration match before installation.
• Warranty: Covered under Carrier OEM manufacturer warranty. Ships same business day from our stocked warehouse — no waiting on backorders.

Compatibility: Designed and factory-specified for Carrier model 07EB027641 commercial HVAC equipment. Always verify pole count, amp rating (60A FLA), and coil voltage (120V AC) against your unit's data plate and wiring diagram before ordering. Our team is available to confirm fitment — just reach out before you buy.