OEM Carrier 3-Pole Compressor Contactor 63A 115V (HN53HF115) for Model 07EB027611

This is the genuine OEM Carrier compressor contactor for the 07EB027611 commercial chiller and condensing unit. The contactor serves as the high-voltage switching relay that energizes the compressor motor on every call for cooling. When the contactor fails — whether from worn contacts, a burned coil, or contact welding — the compressor will not start, leaving you with zero cooling capacity. Common symptoms include a humming compressor that never fully starts, or a unit that trips on high-pressure lockout due to intermittent contact closure.

• Specs: 3-Pole | 63A Full Load Amperage | 110–120V Coil | 50/60 Hz | Replaces legacy Carrier part numbers HN53AF101, HN53AE101, HN53LE200, HN53AE103, HN53LF200, HN53AF103, HN53LF205, HN53LF226
• OEM vs Generic: Genuine Carrier OEM contactors are rated and tested to exact factory amp and coil voltage tolerances. Aftermarket 3-pole contactors frequently use lighter contact plating, which degrades faster under the high inrush currents of large commercial compressors — accelerating failure and risking compressor damage.
• Install difficulty: 3/5 — Commercial-grade contactor replacement requires full electrical lockout/tagout (LOTO) of the unit before service. Tools needed: insulated screwdrivers, torque screwdriver (for lug terminals), multimeter (to verify coil continuity and contact resistance), and a camera or phone to photograph all wiring before disconnecting. Verify coil voltage on your unit's wiring diagram before installing.
• Warranty: 1-year OEM factory warranty. In-stock — ships same business day from our warehouse.

Compatibility: Factory-specified replacement for Carrier model 07EB027611 commercial condensing units. Also fits a wide range of Carrier, Bryant, and Payne 06EV, 06EW, 07EB, 07ED, and 30GA series equipment — check your unit's data plate and wiring diagram to confirm coil voltage and pole count before ordering. Our team is available to verify fitment before you purchase.