OEM Carrier Contactor 2-Pole 24V Coil for Model 07EB027401

This is the factory OEM replacement contactor for the Carrier 07EB027401 commercial refrigeration and HVAC unit, sold under OEM part number HN53HF115. The contactor is the high-voltage relay that energizes the compressor and condenser fan circuit every time your thermostat calls for cooling. When the contactor fails — due to pitted contacts, a burned coil, or a stuck plunger — the system will either refuse to start, short-cycle immediately, or run continuously without responding to the thermostat. Replacing it promptly prevents compressor damage from voltage irregularities.

• Specs: 2-pole configuration | 24V AC control coil | High-amperage load contacts rated for compressor startup surge | Direct OEM replacement per factory spec
• OEM vs Generic: The OEM HN53HF115 uses factory-grade contact material rated for Carrier's exact inrush current profile. Generic contactors often use lower-grade silver-alloy contacts that pit faster, shortening service intervals and risking compressor damage.
• Install Difficulty: 2/5 — Disconnect all power at the breaker before beginning. Tools needed: flathead and Phillips screwdrivers, 1/4" nut driver, needle-nose pliers, multimeter. Photograph all wiring before disconnecting. Coil voltage must match existing unit — verify on data plate.
• Warranty: 1-year OEM factory warranty. Orders placed by cutoff ship same business day from our warehouse.

Compatibility: Designed as a direct OEM replacement for Carrier model 07EB027401. Always confirm coil voltage and pole configuration against your unit's wiring diagram and data plate before ordering. Not sure it fits? Our HVAC parts specialists verify fitment before you buy — contact us before placing your order.