OEM Carrier Discharge Gas Thermostat HN68GA295 for Model 06EW027620

This OEM discharge gas thermostat (part number HN68GA295) is the factory-specified replacement sensor for the Carrier 06EW027620 commercial scroll compressor unit. Mounted directly on the refrigerant discharge line, this thermostat continuously monitors compressor discharge gas temperature. When discharge temperatures exceed safe operating limits — typically caused by low refrigerant charge, loss of suction, or excessive load — the thermostat interrupts the control circuit, protecting the compressor from catastrophic thermal damage. Symptoms of failure include nuisance high-temperature lockouts, compressor shutdowns with no confirmed high-pressure fault, or a system that short-cycles under normal operating loads.

• Specs: 28" total lead length | 1-1/4" sensor element length | Factory-calibrated trip point | USA manufactured | Replaces legacy part numbers: HN68GA121, HN68GA120, 06EG500001, 38AB402182, HH13HA081, HH13HA082
• OEM vs Generic: OEM thermostats are factory-calibrated to precise trip and reset temperatures. Aftermarket substitutes often carry wide tolerance bands that result in either nuisance trips or dangerously delayed shutdowns — neither is acceptable on commercial compressor equipment.
• Install difficulty: 3/5 — System must be locked out and de-energized before work begins. Recover refrigerant charge if line access requires breaking the circuit. Tools needed: refrigerant recovery unit, manifold gauge set, torque wrench, wire terminals. Always verify discharge line temperature rating after reinstallation before returning to service.
• Warranty: 1-year OEM factory warranty against defects in materials and workmanship. Ships same business day from our warehouse when ordered before cutoff.

Compatibility: Designed for use with Carrier model 06EW027620 commercial scroll compressor/chiller applications. Cross-references to legacy Carrier part numbers HN68GA121, HN68GA120, 06EG500001, 38AB402182, 38AB403232, 38AB406642, HH13HA081, and HH13HA082. Verify discharge line diameter and lead length against your unit's service manual before ordering. Our technical team is available to confirm fitment — contact us before you buy.