{"product_id":"tempstar-hot-surface-igniter-sensor-kit-for-t9mpd080j16a4-ships-today","title":"Tempstar Hot Surface Igniter \u0026 Sensor Kit for T9MPD080J16A4 | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThis OEM hot surface igniter and sensor kit (part number 1009524) is the factory replacement ignition component for the Tempstar T9MPD080J16A4 gas furnace. The hot surface igniter glows red-hot when the control board calls for heat, lighting the burners, while the integrated sensor confirms a flame is present and signals the board to keep the gas valve open. A failed igniter is one of the most common reasons a furnace stops producing heat. Typical symptoms include no ignition on a heat call, the furnace cycling on and off without firing (short cycling), a cracked or visibly damaged igniter element, or the unit locking out after several failed ignition attempts. Hot surface igniters are brittle and degrade over time, making this a routine maintenance replacement.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e1009524\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHot Surface Igniter \/ Sensor Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eTempstar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eGas Furnace Ignition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eOEM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eDirect OEM fit for the Tempstar T9MPD080J16A4 80,000 BTU gas furnace. As an ICP-family component, the same igniter kit is shared across equivalent Heil, Comfortmaker, and Tempstar models. Verify OEM part number 1009524 against your furnace before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect power at the furnace switch and breaker, then verify zero voltage with a multimeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the burner compartment service panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph the igniter mounting position and wire routing before disconnecting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug the igniter harness, remove the mounting screw, and carefully withdraw the old igniter without touching the ceramic element.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new igniter handling it only by the base, reinstall the screw, and reconnect the harness per your photo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore power and run a heat cycle to confirm the igniter glows and the burners light reliably.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNo heat — burners never light on a heat call\u003c\/li\u003e\n\u003cli\u003eFurnace short cycles or locks out after repeated ignition attempts\u003c\/li\u003e\n\u003cli\u003eIgniter element is cracked, chipped, or shows no glow\u003c\/li\u003e\n\u003cli\u003eVisible carbon buildup or breakage on the ceramic\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eShips same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"Tempstar","offers":[{"title":"Direct Replacement","offer_id":63021680329075,"sku":"1009524-GEN","price":42.95,"currency_code":"USD","in_stock":true},{"title":"OEM","offer_id":63048451162483,"sku":"1009524","price":55.84,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-silicon-carbide-1009524_19a59b72-36fc-4aa0-9fe0-914037dc9c4c.jpg?v=1782960087","url":"https:\/\/nationalhvacparts.com\/products\/tempstar-hot-surface-igniter-sensor-kit-for-t9mpd080j16a4-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}