{"product_id":"tempstar-hot-surface-igniter-for-t9mpv125l20c1-silicon-nitride-hsi-ships-today","title":"Tempstar Hot Surface Igniter for T9MPV125L20C1 — Silicon Nitride HSI | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThis OEM hot surface igniter (HSI), part number 1172533, is the direct-fire ignition component for the Tempstar T9MPV125L20C1 two-stage gas furnace. On each heat call the furnace control energizes the igniter, which heats to roughly 1,800–2,500°F and lights the burners. Hot surface igniters are the most common failure point in modern furnaces because the brittle silicon-nitride element degrades with every thermal cycle and from handling. Typical failure symptoms include the furnace blower running with no heat, a clicking gas valve that never lights, a glowing igniter that cracks, or a hard lockout after several failed ignition attempts.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e1172533 (IGNITOR HSI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHot Surface Igniter (silicon nitride)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eTempstar \/ ICP \/ Heil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e120V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eTwo-stage gas furnace ignition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eOEM direct replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eEngineered for the Tempstar T9MPV125L20C1 9-series two-stage variable-speed gas furnace and shared across the ICP \/ Heil \/ Comfortmaker family that uses the 1172533 igniter. Always confirm the part number on your existing igniter before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect power at the furnace switch and breaker, shut off the gas, and verify zero voltage with a multimeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the burner-compartment service panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph the igniter bracket, wiring, and connector before disconnecting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug the igniter harness, remove the mounting screw, and lift the old igniter out without touching the ceramic element.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Seat the new igniter in the bracket, handling it only by the ceramic base, secure the screw, and reconnect the harness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore gas and power, then watch a full ignition cycle to confirm the igniter glows and the burners light.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFurnace blower runs but produces no heat.\u003c\/li\u003e\n\u003cli\u003eIgniter shows visible cracks or no longer glows.\u003c\/li\u003e\n\u003cli\u003eRepeated ignition attempts ending in control-board lockout.\u003c\/li\u003e\n\u003cli\u003eBurners fail to light despite an open gas valve.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eShips same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"Tempstar","offers":[{"title":"Direct Replacement","offer_id":63021678330227,"sku":"1172533-GEN","price":34.0,"currency_code":"USD","in_stock":true},{"title":"OEM","offer_id":63048456470899,"sku":"1172533","price":44.2,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-silicon-nitride-1172533_42af163b-12dc-4bcd-bddd-fb3183513852.jpg?v=1782960296","url":"https:\/\/nationalhvacparts.com\/products\/tempstar-hot-surface-igniter-for-t9mpv125l20c1-silicon-nitride-hsi-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}