{"product_id":"tempstar-contactor-for-t2a336gkd200-1-pole-30a-24v-coil-with-shunt-ships-today","title":"Tempstar Contactor for T2A336GKD200 — 1-Pole 30A 24V Coil with Shunt | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThis is a genuine OEM single-pole definite-purpose contactor (part number 1172472) for the Tempstar T2A336GKD200 air conditioning condensing unit. The contactor is the electromechanical switch that powers the compressor and condenser fan motor whenever the thermostat calls for cooling. A 24-volt control signal energizes the coil, pulling in the armature so the 30-amp contacts close and feed line voltage to the compressor. This contactor is rated 30 amps with a 24V coil and includes a factory shunt for proper single-pole switching. Burned, pitted, or welded contacts are a leading cause of no-cool service calls — producing chattering, hard starts, intermittent cooling, or a compressor that fails to start.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOEM Part Number\u003c\/td\u003e\n\u003ctd\u003e1172472\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eDefinite Purpose Contactor, Single-Pole (1P)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eTempstar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContact Rating\u003c\/td\u003e\n\u003ctd\u003e30 Amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Voltage\u003c\/td\u003e\n\u003ctd\u003e24 VAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoles\u003c\/td\u003e\n\u003ctd\u003e1 (with shunt)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits Model\u003c\/td\u003e\n\u003ctd\u003eT2A336GKD200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eA direct OEM replacement for the Tempstar T2A336GKD200 condensing unit. Contactor 1172472 is shared across many ICP-family outdoor units, including matching Heil, Comfortmaker, and Tempstar 1.5–4 ton split-system condensers that use a single-pole 24V\/30A contactor. Always confirm the existing contactor's pole count, coil voltage, and amp rating before installing.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect power at the outdoor disconnect and main breaker, then verify zero voltage at the contactor terminals with a multimeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the condenser service panel to expose the electrical compartment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph all wire connections before disconnecting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Label and disconnect the line, load, and 24V coil leads, then unscrew the old contactor from its bracket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new contactor, reconnect each wire per your photo, and confirm the shunt and coil leads are seated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore power, call for cooling, and verify the contactor pulls in cleanly with the compressor and fan running.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChattering, buzzing, or humming from the outdoor unit on a cooling call.\u003c\/li\u003e\n\u003cli\u003eCompressor and condenser fan won't start though the thermostat is calling.\u003c\/li\u003e\n\u003cli\u003eBurned, pitted, melted, or welded contacts on inspection.\u003c\/li\u003e\n\u003cli\u003eUnit short-cycles or sticks running because the contacts welded closed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eShips same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"Tempstar","offers":[{"title":"Direct Replacement","offer_id":63021824213363,"sku":"1172472-GEN","price":32.95,"currency_code":"USD","in_stock":true},{"title":"OEM","offer_id":63048422326643,"sku":"1172472","price":42.84,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-contactor-1pole-1172472_5a2882bc-e649-4d3d-9fa5-7497e5a21459.jpg?v=1782958974","url":"https:\/\/nationalhvacparts.com\/products\/tempstar-contactor-for-t2a336gkd200-1-pole-30a-24v-coil-with-shunt-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}