{"product_id":"tempstar-1-pole-30a-contactor-for-t2a348gkd200-24v-coil-w-shunt-ships-today","title":"Tempstar 1-Pole 30A Contactor for T2A348GKD200 — 24V Coil w\/ Shunt | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThis is a genuine OEM 1-pole definite purpose contactor with shunt (Part Number 1172472) for the Tempstar T2A348GKD200 condensing unit. The contactor is an electrically controlled switch that uses a 24-volt control signal from your thermostat to energize the high-voltage circuit feeding the compressor and condenser fan motor. Rated at 30 amps with a 24V coil, the single-pole design switches one line leg while the shunt maintains the constant leg, making it a compact and economical switching device for the outdoor unit. When the contactor fails, the most common symptoms are an outdoor unit that will not start, a humming or chattering noise from the control box, pitted or burned contact points, or a system that runs continuously because the contacts have welded shut. Replacing a worn contactor is one of the most common and inexpensive HVAC repairs.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e1172472\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eDefinite Purpose Contactor w\/ Shunt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eTempstar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoles\u003c\/td\u003e\n\u003ctd\u003e1-Pole\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContact Rating\u003c\/td\u003e\n\u003ctd\u003e30 Amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Voltage\u003c\/td\u003e\n\u003ctd\u003e24V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits Model\u003c\/td\u003e\n\u003ctd\u003eT2A348GKD200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eThis contactor is a direct OEM fit for the Tempstar T2A348GKD200 air conditioning condensing unit. It is also used across many ICP-family units (Heil, Comfortmaker, Tempstar, Arcoaire) that share the same 30A 1-pole 24V coil platform with shunt. Always verify the part number on your existing contactor before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect power at the outdoor disconnect and breaker, then verify zero voltage with a multimeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the service panel on the condensing unit to expose the control box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph all wire connections before disconnecting anything.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Note the line, load, shunt, and 24V coil terminals, then transfer wires one at a time. Unscrew the old contactor from the bracket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new contactor and reconnect each wire per your photo, ensuring the shunt leg is wired correctly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore power and confirm the contactor pulls in and the unit starts on a cooling call.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOutdoor unit hums but the compressor and fan will not start.\u003c\/li\u003e\n\u003cli\u003eBurned, pitted, or melted contact points.\u003c\/li\u003e\n\u003cli\u003eLoud chattering or buzzing from the control box.\u003c\/li\u003e\n\u003cli\u003eAC runs nonstop because contacts have welded closed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eShips same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"Tempstar","offers":[{"title":"Direct Replacement","offer_id":63021823525235,"sku":"1172472-GEN","price":27.95,"currency_code":"USD","in_stock":true},{"title":"OEM","offer_id":63048383201651,"sku":"1172472","price":36.34,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-contactor-1pole-1172472_76a0b105-cd24-46fa-86fe-052b1e5e7f93.jpg?v=1782957035","url":"https:\/\/nationalhvacparts.com\/products\/tempstar-1-pole-30a-contactor-for-t2a348gkd200-24v-coil-w-shunt-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}