{"product_id":"icp-x-13-ecm-blower-motor-control-for-wapm244a1-1-2-hp-ships-today","title":"ICP X-13 ECM Blower Motor Control for WAPM244A1 — 1\/2 HP | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThis is the genuine ICP \/ Tempstar \/ Heil OEM X-13 ECM blower motor control module (part number 1185289) for the WAPM244A1 air handler. The X-13 is a programmed electronically commutated motor (ECM) rated at 1\/2 HP that drives the indoor blower wheel. Unlike a standard PSC motor, the X-13 holds preset torque stages selected by the control board, delivering quieter operation and better efficiency. When this motor fails you typically see weak or no airflow, the blower humming without spinning, intermittent shutdowns, or the motor running hot and cutting out on thermal overload. Restricted airflow from a failing blower motor can also cause coil freeze-ups and high-limit trips.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOEM Part Number\u003c\/td\u003e\n\u003ctd\u003e1185289\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eX-13 ECM Blower Motor Control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP (Tempstar \/ Heil)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHorsepower\u003c\/td\u003e\n\u003ctd\u003e1\/2 HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Technology\u003c\/td\u003e\n\u003ctd\u003eElectronically Commutated (ECM)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e208\/230 VAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFit\u003c\/td\u003e\n\u003ctd\u003eOEM Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eDirect OEM replacement for the ICP \/ Tempstar \/ Heil WAPM244A1 air handler. The 1185289 1\/2 HP X-13 motor is shared across comparable 208\/230V air handlers in the same family. Confirm horsepower (1\/2 HP) and motor type (X-13 ECM) match your original before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect power at the breaker and verify zero voltage with a multimeter before servicing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the blower compartment service panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph the motor harness, control plug, and blower wheel position before disconnecting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug the motor and control connections, loosen the blower wheel set screw, and pull the old motor from the housing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Slide the new X-13 motor into the housing, secure the blower wheel and set screw, and reconnect the harness exactly per your photo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore power, call for blower operation, and verify smooth airflow across all programmed speed taps.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWeak, low, or no airflow from the supply registers\u003c\/li\u003e\n\u003cli\u003eMotor hums but the blower wheel will not turn\u003c\/li\u003e\n\u003cli\u003eBlower cycles on and off or shuts down on thermal overload\u003c\/li\u003e\n\u003cli\u003eUnusual noise, vibration, or burning smell from the blower compartment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eShips same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63021613154675,"sku":"1185289","price":259.94,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047759397235,"sku":"1185289-GEN","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-blower-motor-ecm-1185289_02eef772-61eb-4301-850f-41de42a7a2f6.jpg?v=1782897094","url":"https:\/\/nationalhvacparts.com\/products\/icp-x-13-ecm-blower-motor-control-for-wapm244a1-1-2-hp-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}