{"product_id":"icp-x-13-control-board-for-wta3302000rka1-ecm-motor-module-ships-today","title":"ICP X-13 Control Board for WTA3302000RKA1 — ECM Motor Module | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThis OEM ICP X-13 circuit board (part number 1173692) is the ECM motor control module for the ICP\/Tempstar\/Heil WTA3302000RKA1 system. The X-13 board is the brain that drives the constant-torque ECM blower motor, interpreting the thermostat and equipment inputs and commanding the correct motor speed tap for heating, cooling, and continuous-fan operation. Because it carries both control logic and motor signaling, a failed X-13 board can leave the blower dead, stuck on one speed, or short-cycling. Failures typically come from voltage surges, lightning, moisture, or overheating, and often show up as burnt traces, swollen capacitors, or scorched relays on the board itself. Swapping the board restores proper airflow staging without replacing the entire motor assembly.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e1173692\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eX-13 ECM Motor Control Board\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP (Tempstar \/ Heil \/ Comfortmaker)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eConstant-Torque ECM Blower Control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits Model\u003c\/td\u003e\n\u003ctd\u003eWTA3302000RKA1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eDirect OEM fit for the ICP\/Tempstar\/Heil WTA3302000RKA1 system and comparable ICP-family equipment that uses the X-13 ECM control module. Verify the part number (1173692) and connector layout against your existing board before installing.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect power at the breaker and verify zero voltage with a multimeter before opening the control area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the blower compartment \/ control service panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph every harness, motor, and low-voltage connection on the board before unplugging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug each connector, release the board standoffs or mounting screws, and lift out the old X-13 board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Seat the new board on its standoffs and reconnect every harness to the matching plug per your photo, confirming the motor connector is fully latched.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore power and verify the blower starts and ramps to the correct speed on heat, cool, and fan-only calls.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBlower motor doesn't run on any call for heat, cool, or fan.\u003c\/li\u003e\n\u003cli\u003eMotor stuck at one speed or running at the wrong airflow stage.\u003c\/li\u003e\n\u003cli\u003eVisible burnt traces, scorched relays, or bulged capacitors on the board.\u003c\/li\u003e\n\u003cli\u003eIntermittent blower operation or no response to thermostat changes after surge or storm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eShips same day on orders placed before 3 PM CST. 30-day hassle-free returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63021480051059,"sku":"WTA3302000RKA1","price":214.44,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047758315891,"sku":"WTA3302000RKA1-GEN","price":164.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-control-board-furnace-WTA3302000RKA1.jpg?v=1782897053","url":"https:\/\/nationalhvacparts.com\/products\/icp-x-13-control-board-for-wta3302000rka1-ecm-motor-module-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}