{"product_id":"icp-hot-surface-igniter-with-wiring-kit-for-rgs091ldca0aaa-oem-ignition-ships-today","title":"ICP Hot Surface Igniter with Wiring Kit for RGS091LDCA0AAA — OEM Ignition | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eThe ICP 1171306 is an OEM hot surface igniter, supplied here with the matching 1188370 igniter wiring kit, for the RGS091LDCA0AAA gas furnace. On each heat call the control board sends line voltage to the igniter, heating its silicon-carbide element to roughly 2,000°F to light the burner gas. The included wiring kit provides the correct connector, leads, and strain relief so the igniter mates cleanly to the harness without splicing. Igniters are one of the most common no-heat failures — the brittle element cracks with thermal cycling and breaks the circuit, leaving the furnace to run the inducer and blower but never light, or to lock out on failed ignition. Replacing the igniter and its wiring together restores dependable, on-spec ignition.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Numbers\u003c\/td\u003e\n\u003ctd\u003e1171306 (Igniter), 1188370 (Wiring Kit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHot Surface Igniter w\/ Wiring Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP (Tempstar \/ Heil)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElement\u003c\/td\u003e\n\u003ctd\u003eSilicon Carbide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits Model\u003c\/td\u003e\n\u003ctd\u003eRGS091LDCA0AAA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eOEM Direct Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eDirect OEM replacement for ICP, Tempstar, Heil, and Comfortmaker RGS091LDCA0AAA series gas furnaces and related models sharing the same ignition system. Verify your igniter style and connector against the existing part before installing.\u003c\/p\u003e\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect power at the furnace switch and verify zero voltage with a multimeter; shut off the gas supply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the burner compartment service panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph the igniter position and wiring routing before disconnecting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug the igniter connector and remove the mounting screw. Handle the new igniter by the ceramic base only — never touch the silicon-carbide element with bare fingers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new igniter in the burner flame path, install the supplied wiring kit, and seat the connector fully.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore gas and power, then watch a full ignition cycle to confirm the igniter glows and lights the burners promptly.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFurnace runs the inducer and blower but never lights\u003c\/li\u003e\n\u003cli\u003eRepeated ignition lockouts or short-cycling on startup\u003c\/li\u003e\n\u003cli\u003eIgniter no longer glows orange during the heat call\u003c\/li\u003e\n\u003cli\u003eVisible cracks or breaks in the silicon-carbide element\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\u003cp\u003eShips same day on orders placed before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63027676217715,"sku":"1171306","price":49.4,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047695270259,"sku":"1171306-GEN","price":38.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-silicon-carbide-1171306_c5b31f3d-571f-4db5-b380-8f86a14759d4.jpg?v=1782894448","url":"https:\/\/nationalhvacparts.com\/products\/icp-hot-surface-igniter-with-wiring-kit-for-rgs091ldca0aaa-oem-ignition-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}