{"product_id":"icp-hot-surface-igniter-kit-for-wfmr070a024b1-oem-direct-replacement-ships-today","title":"ICP Hot Surface Igniter Kit for WFMR070A024B1 — OEM Direct Replacement | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThis OEM hot surface igniter assembly is the factory ignition component for the ICP \/ Tempstar \/ Heil WFMR070A024B1 gas furnace. The kit covers the complete ignition train: igniter (OEM 1176919), the igniter mounting bracket (OEM 1183455), and the HSI snap valve (OEM 1176929 \/ 36J24618). The hot surface igniter glows to roughly 2,000°F to ignite the gas at the burners on each call for heat. Because the igniter element is brittle silicon nitride\/carbide, it is one of the most common no-heat failure points in a forced-air furnace. Typical failure symptoms include the furnace clicking but never lighting, a cracked or burned-out glow element, repeated lockouts after three ignition attempts, and intermittent heat on cold mornings.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eIgniter Part Number\u003c\/td\u003e\n\u003ctd\u003e1176919\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBracket Part Number\u003c\/td\u003e\n\u003ctd\u003e1183455\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHSI Snap Valve Part Number\u003c\/td\u003e\n\u003ctd\u003e1176929 (36J24618)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHot Surface Igniter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP \/ Tempstar \/ Heil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits Model\u003c\/td\u003e\n\u003ctd\u003eWFMR070A024B1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eGas Furnace Ignition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eDirect OEM fit for the ICP-family WFMR070A024B1 furnace and its Tempstar, Heil, and Comfortmaker badge equivalents. Always verify your unit's part number against the rating plate before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect power at the furnace switch and breaker, shut off the gas, and verify zero voltage with a multimeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the furnace burner-compartment service panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph the igniter wiring and bracket position before disconnecting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug the igniter connector, remove the mounting screw, and carefully lift the old igniter out without touching the element.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new igniter on its bracket, set the gap per the original position, and reconnect the harness per your photo. Handle the element by the ceramic base only.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore gas and power, then run a heat cycle and confirm the igniter glows and the burners light cleanly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFurnace attempts ignition but burners never light\u003c\/li\u003e\n\u003cli\u003eVisible crack, blistering, or burn-through on the glow element\u003c\/li\u003e\n\u003cli\u003eFurnace locks out after three failed ignition tries\u003c\/li\u003e\n\u003cli\u003eNo glow visible during the ignition sequence\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eShips same day on orders placed before 3 PM CST. 30-day hassle-free returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63021567869299,"sku":"1183455","price":50.7,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047693468019,"sku":"1183455-GEN","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-silicon-carbide-1183455_f85e0ce4-0e0e-4e6f-9fcd-03a14890dde7.jpg?v=1782894340","url":"https:\/\/nationalhvacparts.com\/products\/icp-hot-surface-igniter-kit-for-wfmr070a024b1-oem-direct-replacement-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}