{"product_id":"icp-hot-surface-igniter-kit-for-wfmr045a024b3-with-mounting-bracket-ships-today","title":"ICP Hot Surface Igniter Kit for WFMR045A024B3 — with Mounting Bracket | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eThis OEM hot surface igniter assembly (igniter 1176919 with mounting bracket 1183455 and valve hardware 1176929) is the component that lights the burners on your ICP furnace. On a heating call, 120V is applied to the igniter element until it glows white-hot, igniting the gas as the valve opens. Igniters are the most common furnace failure point: the brittle silicon-carbide element cracks from thermal cycling and simple handling. When it fails, the inducer runs and the gas valve may click, but the burners never light and the board locks out after several failed trial-for-ignition cycles. A visibly cracked element, or one that no longer glows on a call for heat, confirms replacement.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eIgniter Part Number\u003c\/td\u003e\n\u003ctd\u003e1176919\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBracket Part Number\u003c\/td\u003e\n\u003ctd\u003e1183455\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eValve Hardware\u003c\/td\u003e\n\u003ctd\u003e1176929 (HSI snap, WR 36J24618)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHot Surface Igniter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e120V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eDirect-fit OEM replacement for ICP \/ Tempstar \/ Heil model WFMR045A024B3 and related ICP-family gas furnaces using this hot surface ignition platform. Confirm the igniter element and bracket footprint match your original before installing.\u003c\/p\u003e\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect power at the switch and breaker; verify zero voltage with a multimeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the burner-compartment service panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph the igniter position, bracket orientation, and wire routing before disconnecting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug the igniter connector, unscrew the bracket, and carefully withdraw the old igniter without touching the new element with bare fingers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new igniter and bracket, position the element over the burner per your photo, and reconnect the harness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore power, call for heat, and verify the igniter glows and the burners light cleanly.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFurnace inducer runs but burners never ignite\u003c\/li\u003e\n\u003cli\u003eControl board locks out after repeated ignition attempts\u003c\/li\u003e\n\u003cli\u003eVisibly cracked or broken silicon-carbide element\u003c\/li\u003e\n\u003cli\u003eIgniter does not glow on a call for heat\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\u003cp\u003eShips same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63027239911795,"sku":"1183455","price":54.6,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047693435251,"sku":"1183455-GEN","price":42.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-silicon-carbide-1183455_3592a039-8c0c-4eb4-822c-97bca63e1768.jpg?v=1782894337","url":"https:\/\/nationalhvacparts.com\/products\/icp-hot-surface-igniter-kit-for-wfmr045a024b3-with-mounting-bracket-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}