{"product_id":"icp-hot-surface-igniter-kit-for-wfml070a036b3-oem-1176919-with-bracket-ships-today","title":"ICP Hot Surface Igniter Kit for WFML070A036B3 — OEM 1176919 with Bracket | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThis OEM hot surface igniter assembly (ICP igniter 1176919 with mounting bracket 1183455) is the ignition source for the ICP \/ Heil \/ Tempstar WFML070A036B3 gas furnace. On a call for heat, the control board energizes the igniter; it glows white-hot to light the gas at the burners. Hot surface igniters are brittle and degrade over thousands of cycles, making them one of the most frequently replaced furnace parts. A cracked or open igniter produces the classic no-heat symptom: the inducer runs, the gas valve waits, but the burners never light and the furnace locks out. This listing covers the igniter and its bracket; related snap-disc \/ valve hardware (1176929) for this model is sold separately.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e1176919 (igniter), 1183455 (bracket)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHot Surface Igniter (HSI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP \/ Heil \/ Tempstar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElement\u003c\/td\u003e\n\u003ctd\u003eSilicon carbide \/ nitride glow element\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncludes\u003c\/td\u003e\n\u003ctd\u003eIgniter + mounting bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eOEM exact-fit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eDesigned for the ICP \/ Heil \/ Tempstar WFML070A036B3 gas furnace and other ICP-family furnaces using this HSI and bracket. Match the connector and bracket profile to your existing igniter before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect power at the furnace switch and breaker; verify zero voltage with a multimeter and shut the gas if servicing nearby components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the burner-compartment service panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph the igniter position, bracket, and wire routing before disconnecting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug the igniter connector, unscrew the bracket, and lift the assembly out. Never touch the glow element with bare fingers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new igniter and bracket in the original position, confirm proper alignment over the burner, and reconnect the lead.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore power and gas, run a heat call, and confirm the igniter glows and the burners light.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInducer runs but burners never ignite\u003c\/li\u003e\n\u003cli\u003eIgniter does not glow, or glows weakly\u003c\/li\u003e\n\u003cli\u003eVisible crack, chip, or white-spot damage on the element\u003c\/li\u003e\n\u003cli\u003eFurnace lockout after several failed ignition attempts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eShips same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63027241746803,"sku":"1183455","price":44.2,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047693205875,"sku":"1183455-GEN","price":34.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-silicon-carbide-1183455_52b6318b-2010-4622-ad1c-f9b3fb91dd49.jpg?v=1782894321","url":"https:\/\/nationalhvacparts.com\/products\/icp-hot-surface-igniter-kit-for-wfml070a036b3-oem-1176919-with-bracket-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}