{"product_id":"icp-hot-surface-igniter-kit-for-wfml045a024b3-with-bracket-ships-today","title":"ICP Hot Surface Igniter Kit for WFML045A024B3 — With Bracket | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eThis OEM hot surface igniter (part number 1176919) with its matched mounting bracket (1183455) is the ignition source for the ICP \/ Heil \/ Tempstar WFML045A024B3 gas furnace. On a call for heat the control board energizes the igniter, which glows red-hot to light the burners. Hot surface igniters are brittle and wear out over time — micro-cracks, carbon buildup, and thermal fatigue eventually stop them from reaching ignition temperature, leaving you with a furnace that cycles, clicks, but never lights. This is the single most common no-heat failure on modern gas furnaces. Installing a fresh OEM igniter and bracket restores fast, reliable ignition. A compatible White-Rodgers 36J24618 snap-on HSI gas valve (part 1176929) is also referenced for this model for technicians servicing the full ignition assembly.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eIgniter Part Number\u003c\/td\u003e\n\u003ctd\u003e1176919\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBracket Part Number\u003c\/td\u003e\n\u003ctd\u003e1183455\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelated Valve Reference\u003c\/td\u003e\n\u003ctd\u003e1176929 (HSI snap, WR 36J24618)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHot surface igniter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP \/ Heil \/ Tempstar \/ Comfortmaker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFit\u003c\/td\u003e\n\u003ctd\u003eOEM direct replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eDesigned for the ICP WFML045A024B3 furnace and other Heil, Tempstar, Comfortmaker, and Arcoaire models using this hot surface igniter and bracket. Handle the igniter element by the ceramic base only — never touch the glow element.\u003c\/p\u003e\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Shut off gas and electrical power, then verify zero voltage at the igniter leads with a multimeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the burner compartment service panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph the igniter position and wiring relative to the burners before removal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug the igniter harness and unscrew the old igniter and bracket; discard carefully (the element is fragile).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new bracket and igniter at the factory gap from the burner, handling only the ceramic base, then reconnect the harness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore gas and power and confirm the igniter glows and lights the burners on the first ignition attempt.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFurnace clicks and cycles but burners never light\u003c\/li\u003e\n\u003cli\u003eIgniter shows cracks, blisters, or no longer glows\u003c\/li\u003e\n\u003cli\u003eRepeated ignition lockouts after multiple tries\u003c\/li\u003e\n\u003cli\u003eVisible carbon buildup or a fractured glow element\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\u003cp\u003eShips same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63027242795379,"sku":"1183455","price":48.04,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047693074803,"sku":"1183455-GEN","price":36.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-silicon-carbide-1183455_09280ba6-60d0-4d3f-a869-dad730f6d5f5.jpg?v=1782894314","url":"https:\/\/nationalhvacparts.com\/products\/icp-hot-surface-igniter-kit-for-wfml045a024b3-with-bracket-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}