{"product_id":"icp-hot-surface-igniter-kit-for-wfhr080b048a1-furnace-ignition-ships-today","title":"ICP Hot Surface Igniter Kit for WFHR080B048A1 — Furnace Ignition | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eThis OEM hot surface igniter kit (parts 1176919 igniter, 1177210 mounting bracket, and 1177204 slow-opening HSI gas valve) is the factory ignition assembly for the ICP\/Tempstar\/Heil WFHR080B048A1 gas furnace. The igniter is a silicon-nitride\/carbide element that glows red-hot when energized at 120V to light the burner gas on each heating call. After repeated heating cycles the element develops micro-cracks and hot spots and eventually fails to reach ignition temperature — the most common cause of a furnace that clicks and runs the inducer but never lights. Symptoms of a failing igniter include short cycling, repeated ignition lockouts, a cracked or white-discolored element, delayed ignition with a small \"whoomp,\" and no glow at the burner during a call for heat.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eIgniter Part Number\u003c\/td\u003e\n\u003ctd\u003e1176919\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBracket Part Number\u003c\/td\u003e\n\u003ctd\u003e1177210\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eValve Part Number\u003c\/td\u003e\n\u003ctd\u003e1177204\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHot Surface Igniter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP \/ Tempstar \/ Heil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e120V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eOEM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eEngineered as a direct-fit replacement for the ICP family WFHR080B048A1 gas furnace and shared-platform Tempstar, Heil, and Comfortmaker models using the same ignition assembly. Always match the printed part number on your existing igniter and bracket before installing.\u003c\/p\u003e\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect power at the furnace switch and breaker, and verify zero voltage with a multimeter. Shut off the gas supply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the furnace blower\/burner service panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph the igniter wiring and bracket position before disconnecting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug the igniter connector, remove the bracket screw, and lift the old igniter out without touching the new element with bare fingers (skin oil shortens element life).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new igniter on the bracket, position per your photo, and reconnect the plug.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore gas and power, call for heat, and confirm the element glows and the burner lights within seconds.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFurnace inducer runs but burner never lights\u003c\/li\u003e\n\u003cli\u003eRepeated ignition lockout \/ hard lockout codes\u003c\/li\u003e\n\u003cli\u003eCracked, chipped, or white-discolored element\u003c\/li\u003e\n\u003cli\u003eNo glow at the igniter during a heat call\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\u003cp\u003eShips same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63021589299571,"sku":"1177210","price":45.44,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047692878195,"sku":"1177210-GEN","price":34.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-silicon-carbide-1177210_f4e8d252-9660-4e31-9ddd-12ab5738beb4.jpg?v=1782894300","url":"https:\/\/nationalhvacparts.com\/products\/icp-hot-surface-igniter-kit-for-wfhr080b048a1-furnace-ignition-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}