{"product_id":"icp-hot-surface-igniter-kit-for-wfel110c060a1-oem-with-bracket-ships-today","title":"ICP Hot Surface Igniter Kit for WFEL110C060A1 — OEM with Bracket | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThis genuine OEM hot surface igniter assembly is the ignition source for your ICP Tempstar Heil WFEL110C060A1 gas furnace. On each heat call the control board energizes the igniter (part 1176919), which glows white-hot to light the main burners. The kit includes the matched igniter mounting bracket (part 1183455) for precise positioning in the burner flame path, plus the related HSI snap gas-valve component (part 1176929) referenced for this model. Hot surface igniters are brittle silicon-nitride\/carbide elements that degrade with every heating cycle and eventually crack or lose conductivity — the single most common cause of a furnace that clicks, draws, but never lights.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eIgniter Part Number\u003c\/td\u003e\n\u003ctd\u003e1176919\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBracket Part Number\u003c\/td\u003e\n\u003ctd\u003e1183455\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelated Valve \/ HSI Part\u003c\/td\u003e\n\u003ctd\u003e1176929 (Valve N HSI Snap WR 36J24618)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHot Surface Igniter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP (Tempstar \/ Heil)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eGas Furnace Burner Ignition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFit\u003c\/td\u003e\n\u003ctd\u003eGenuine OEM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eEngineered as a direct factory replacement for the ICP Tempstar Heil WFEL110C060A1 gas furnace. The 1176919 igniter and 1183455 bracket are shared across many ICP-family (Comfortmaker, Arcoaire, Heil, Tempstar) furnaces using the same burner ignition system. Confirm your existing igniter style and bracket footprint before installing.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect power at the furnace switch and breaker, shut off the gas, and verify zero voltage with a multimeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the burner-compartment service panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph the igniter position, bracket orientation, and wire routing before disconnecting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug the igniter connector and unscrew the old igniter\/bracket from the burner assembly. Handle by the ceramic base only — never touch the fragile element.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new bracket and igniter so the element sits correctly in the burner flame path, then reconnect the harness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore gas and power, run a heat call, and confirm the igniter glows and the burners light promptly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFurnace tries to start, draft inducer runs, but burners never light\u003c\/li\u003e\n\u003cli\u003eIgniter does not glow, or glows weakly\/unevenly\u003c\/li\u003e\n\u003cli\u003eVisible cracks, chips, or white discoloration on the igniter element\u003c\/li\u003e\n\u003cli\u003eRepeated lockouts after several failed ignition attempts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eShips same day before 3 PM CST. 30-day returns. National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63027245056371,"sku":"1183455","price":54.6,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047692616051,"sku":"1183455-GEN","price":42.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-silicon-carbide-1183455_95f881d6-6b5d-4b3f-8a92-b3655b357646.jpg?v=1782894283","url":"https:\/\/nationalhvacparts.com\/products\/icp-hot-surface-igniter-kit-for-wfel110c060a1-oem-with-bracket-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}