{"product_id":"icp-hot-surface-igniter-kit-for-wfel070b048a1-hsi-bracket-ships-today","title":"ICP Hot Surface Igniter Kit for WFEL070B048A1 — HSI + Bracket | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThis OEM hot surface igniter assembly fits the ICP \/ Tempstar \/ Heil WFEL070B048A1 furnace and includes the igniter (part #1176919), its mounting bracket (part #1183455), and the matched HSI snap-on valve component (part #1176929, ref 36J24618). On a call for heat, the control board energizes the igniter, which glows red-hot to ignite the gas at the burners. A cracked, weakened, or burnt-out igniter is the single most common cause of a furnace that clicks, runs the inducer, but never lights — leaving you with no heat. Igniters are fragile silicon-carbide or nitride elements that degrade over thousands of heating cycles. This OEM kit restores reliable ignition with the correct resistance and mounting geometry.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eIgniter Part Number\u003c\/td\u003e\n\u003ctd\u003e1176919\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBracket Part Number\u003c\/td\u003e\n\u003ctd\u003e1183455\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHSI Valve Component\u003c\/td\u003e\n\u003ctd\u003e1176929 (36J24618)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHot Surface Igniter (HSI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP \/ Tempstar \/ Heil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eGas Furnace Ignition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFit\u003c\/td\u003e\n\u003ctd\u003eOEM Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eA direct OEM replacement for the ICP, Tempstar, Heil, and Comfortmaker family WFEL070B048A1 furnace. Match the igniter part number 1176919 and its bracket 1183455 to your existing assembly before installing. Handle the element only by its ceramic base — never touch the glowing tip.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect power at the furnace switch and breaker, then verify zero voltage with a multimeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the furnace burner compartment service panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph the igniter position, bracket orientation, and wire harness connector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug the igniter connector, remove the bracket screw, and lift out the old igniter without touching the element.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new igniter and bracket so the tip aligns over the burner, then reconnect the harness per your photo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore power, call for heat, and confirm the igniter glows bright and the burners light promptly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFurnace runs the inducer but burners never light — no heat\u003c\/li\u003e\n\u003cli\u003eVisible cracks, chips, or white spots on the igniter element\u003c\/li\u003e\n\u003cli\u003eIgniter glows weakly or not at all on a call for heat\u003c\/li\u003e\n\u003cli\u003eRepeated ignition lockouts after several retry attempts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eShips same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63027245416819,"sku":"1183455","price":54.6,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047692484979,"sku":"1183455-GEN","price":42.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-silicon-carbide-1183455_44f64bcc-c981-43bd-8fba-dcdbf5d1819c.jpg?v=1782894274","url":"https:\/\/nationalhvacparts.com\/products\/icp-hot-surface-igniter-kit-for-wfel070b048a1-hsi-bracket-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}