{"product_id":"icp-hot-surface-igniter-kit-for-wfar100c048b2-includes-igniter-bracket-ships-today","title":"ICP Hot Surface Igniter Kit for WFAR100C048B2 — Includes Igniter Bracket | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eThis OEM hot surface igniter kit is the factory-correct ignition component for the ICP\/Tempstar\/Heil WFAR100C048B2 gas furnace. The kit includes igniter element 1176919 and igniter mounting bracket 1184324 for a complete, drop-in replacement. The hot surface igniter (HSI) glows to roughly 2,000°F when the control board calls for heat, lighting the gas at the burner. When the igniter cracks, weakens, or burns out, the furnace fails to light, short-cycles, or locks out after several failed ignition attempts. Because the silicon carbide (or silicon nitride) element is brittle and degrades with every heating cycle, the matched bracket ensures correct alignment in the burner flame path so the new igniter lights the gas reliably.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Numbers\u003c\/td\u003e\n\u003ctd\u003e1176919 (Igniter), 1184324 (Bracket)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHot Surface Igniter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP \/ Tempstar \/ Heil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFit\u003c\/td\u003e\n\u003ctd\u003eOEM Direct Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eGas Furnace Ignition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e120V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eEngineered specifically for the ICP\/Tempstar\/Heil model WFAR100C048B2 furnace and shared platform models from Comfortmaker and other ICP family brands using the same burner assembly. Confirm your existing igniter and bracket part numbers before ordering.\u003c\/p\u003e\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect power at the furnace switch and breaker; verify zero voltage with a multimeter and shut off the gas supply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the furnace service \/ burner compartment panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph the igniter wiring and bracket position before disconnecting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug the igniter connector, unscrew the bracket, and carefully withdraw the old igniter without touching the element.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new igniter on bracket 1184324, position it in the burner flame path per your photo, and reconnect the harness. Handle the element by the ceramic base only.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore gas and power, then run a heat cycle and confirm the igniter glows and lights the burners.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFurnace clicks and tries to start but never lights\u003c\/li\u003e\n\u003cli\u003eIgniter does not glow or glows dimly\/unevenly\u003c\/li\u003e\n\u003cli\u003eVisible cracks, blistering, or white spots on the element\u003c\/li\u003e\n\u003cli\u003eControl board lockout after 3+ failed ignition attempts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\u003cp\u003eShips same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63027246858611,"sku":"1184324","price":49.4,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047692386675,"sku":"1184324-GEN","price":38.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-silicon-carbide-1184324_f91fdc0a-3ce1-4d01-bf01-ea6701c9cada.jpg?v=1782894267","url":"https:\/\/nationalhvacparts.com\/products\/icp-hot-surface-igniter-kit-for-wfar100c048b2-includes-igniter-bracket-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}