{"product_id":"icp-hot-surface-igniter-kit-for-rgs150sfba0agaa-includes-igniter-wiring-harness-ships-today","title":"ICP Hot Surface Igniter Kit for RGS150SFBA0AGAA — Includes Igniter Wiring Harness | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThis OEM hot surface igniter assembly is the direct ignition source for the ICP\/Tempstar\/Heil RGS150SFBA0AGAA gas furnace. The igniter (OEM 1171306) glows to a high temperature on each call for heat to light the main burners, while the included igniter wiring kit (OEM 1188370) replaces the brittle, heat-fatigued harness that connects it to the control board. A failed or cracked igniter is one of the most common causes of no-heat calls: the element develops hairline fractures, loses continuity, and the furnace locks out after several failed ignition attempts. Replacing the igniter together with its wiring kit restores reliable, single-try ignition and prevents repeat callbacks from a marginal connector.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOEM Part Number (Igniter)\u003c\/td\u003e\n\u003ctd\u003e1171306\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOEM Part Number (Wiring Kit)\u003c\/td\u003e\n\u003ctd\u003e1188370\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHot Surface Igniter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP \/ Tempstar \/ Heil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eGas Furnace Direct Ignition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits Model\u003c\/td\u003e\n\u003ctd\u003eRGS150SFBA0AGAA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eEngineered for the ICP-family RGS150SFBA0AGAA furnace and the closely related Tempstar, Heil, and Comfortmaker variants that share the same ignition platform. Always confirm your existing igniter's part number and connector before ordering. This is the OEM-specified replacement, not a universal substitute.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect power at the furnace switch and breaker, shut off the gas, and verify zero voltage with a multimeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the burner compartment service panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph the igniter mounting position and the wiring harness routing before disconnecting anything.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug the igniter connector, remove the mounting screw(s), and lift the old igniter out by its ceramic base — never touch the element. Cut or unplug the old harness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new igniter in the exact original position so the element sits in the burner flame path, then connect the new wiring kit per your photo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore gas and power and watch a full ignition cycle: the igniter should glow bright and light the burners on the first try.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFurnace clicks and tries to light but never ignites, then locks out.\u003c\/li\u003e\n\u003cli\u003eIgniter shows visible cracks, blisters, or no longer glows.\u003c\/li\u003e\n\u003cli\u003eRepeated ignition retries before the burners finally catch.\u003c\/li\u003e\n\u003cli\u003eMelted, discolored, or loose igniter connector and harness.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eShips same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63027360268659,"sku":"1171306","price":42.84,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047691862387,"sku":"1171306-GEN","price":32.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-silicon-carbide-1171306_90914050-a1c8-473e-959d-4b17bbcdcb2f.jpg?v=1782894234","url":"https:\/\/nationalhvacparts.com\/products\/icp-hot-surface-igniter-kit-for-rgs150sfba0agaa-includes-igniter-wiring-harness-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}