{"product_id":"icp-hot-surface-igniter-kit-for-rgs150seaa0aaaa-with-wiring-harness-ships-today","title":"ICP Hot Surface Igniter Kit for RGS150SEAA0AAAA — With Wiring Harness | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThis OEM hot surface igniter kit is the factory ignition source for the ICP \/ Tempstar \/ Heil RGS150SEAA0AAAA gas furnace. The igniter (OEM 1171306) is a silicon-carbide hot surface element that glows red-hot when energized by the 120V ignition circuit, lighting the burners on each call for heat. The included wiring kit (OEM 1188370) supplies the matched pigtail harness and connector so the igniter mates cleanly to the control board without splicing. A failed igniter is one of the most common no-heat causes on these furnaces — the brittle element cracks from thermal cycling or carbon fouling and stops glowing, so the burners never light and the board locks out.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e1171306 (igniter), 1188370 (wiring kit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHot Surface Igniter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP \/ Tempstar \/ Heil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e120V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElement\u003c\/td\u003e\n\u003ctd\u003eSilicon carbide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFit\u003c\/td\u003e\n\u003ctd\u003eOEM, direct replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eDesigned for the ICP \/ Tempstar \/ Heil RGS150SEAA0AAAA gas furnace and shares the same ignition platform as many RGS-series and comparable Heil\/Tempstar\/Comfortmaker single-stage gas furnaces of this generation. Always confirm against your unit's model and serial tag before installing.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect power at the furnace switch and breaker, and close the gas shutoff. Verify zero voltage with a multimeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the blower\/burner service panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph the igniter bracket and wire routing before disconnecting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug the igniter harness at the control board, remove the igniter mounting screw, and lift the old element out — handle only by the ceramic base, never the element.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Seat the new igniter in the burner assembly, secure the screw, and connect the new wiring kit to the board per your photo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore gas and power, call for heat, and confirm the igniter glows and the burners light within the normal ignition sequence.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFurnace blower runs but the burners never light (no-heat call).\u003c\/li\u003e\n\u003cli\u003eIgniter no longer glows orange\/red during the ignition sequence.\u003c\/li\u003e\n\u003cli\u003eVisible cracks, chips, or white\/gray carbon buildup on the element.\u003c\/li\u003e\n\u003cli\u003eControl board flashes an ignition-failure or lockout fault code.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eShips same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63027372392819,"sku":"1171306","price":48.04,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047691633011,"sku":"1171306-GEN","price":36.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-silicon-carbide-1171306_f5cdfffd-dc3a-47bb-a107-46a7e331ab76.jpg?v=1782894221","url":"https:\/\/nationalhvacparts.com\/products\/icp-hot-surface-igniter-kit-for-rgs150seaa0aaaa-with-wiring-harness-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}