{"product_id":"icp-hot-surface-igniter-kit-for-rgs121htba0aaaa-oem-1171306-with-wiring-harness-ships-today","title":"ICP Hot Surface Igniter Kit for RGS121HTBA0AAAA — OEM 1171306 with Wiring Harness | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThis OEM hot surface igniter assembly is the direct-fit ignition component for the ICP \/ Heil \/ Tempstar RGS121HTBA0AAAA gas furnace. The kit includes OEM ignitor part number 1171306 and the matching igniter wiring kit 1188370, giving you everything needed to restore reliable ignition. The hot surface igniter glows red-hot on each call for heat to ignite the gas at the burners. Because the element is brittle silicon carbide or silicon nitride, it is one of the most common furnace failure points — repeated thermal cycling, soot, and handling damage cause hairline cracks that interrupt the heating cycle. Typical failure symptoms include the furnace blower running with no heat, a clicking or repeated ignition attempt that ends in lockout, an igniter that no longer glows, or a system that short-cycles on a hard or warm restart.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number (Igniter)\u003c\/td\u003e\n\u003ctd\u003e1171306\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number (Wiring Kit)\u003c\/td\u003e\n\u003ctd\u003e1188370\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHot Surface Igniter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP \/ Heil \/ Tempstar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eGas Furnace Ignition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eOEM Direct Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eEngineered as a direct OEM replacement for the ICP \/ Heil \/ Tempstar \/ Comfortmaker RGS121HTBA0AAAA furnace. The included wiring kit ensures a clean plug-and-play connection without splicing the existing harness. Always confirm your model and serial tag before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect power at the furnace switch and breaker, then verify zero voltage with a multimeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the lower service panel to expose the burner assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph the igniter bracket position and wiring routing before disconnecting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug the igniter connector, remove the mounting screw, and lift the old igniter clear — handle only by the ceramic base, never the element.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new igniter at the same depth and angle, secure the screw, and connect the new wiring kit per your photo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore power, initiate a heat call, and confirm the igniter glows and the burners light within seconds.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIgniter no longer glows on a call for heat.\u003c\/li\u003e\n\u003cli\u003eFurnace locks out after repeated failed ignition attempts.\u003c\/li\u003e\n\u003cli\u003eVisible cracks, blistering, or white spots on the element.\u003c\/li\u003e\n\u003cli\u003eBlower runs but the system delivers no warm air.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eShips same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63027507364211,"sku":"1171306","price":51.94,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047689470323,"sku":"1171306-GEN","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-silicon-carbide-1171306_ef2a909b-d784-4cd1-ad4d-807bf727ad37.jpg?v=1782894076","url":"https:\/\/nationalhvacparts.com\/products\/icp-hot-surface-igniter-kit-for-rgs121htba0aaaa-oem-1171306-with-wiring-harness-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}