{"product_id":"icp-hot-surface-igniter-kit-for-rgs102ldaa0aaa-oem-1171306-ships-today","title":"ICP Hot Surface Igniter Kit for RGS102LDAA0AAA — OEM 1171306 | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThis is the OEM hot surface igniter (part number 1171306) with its matching igniter wiring kit (part number 1188370) for the ICP\/Tempstar\/Heil RGS102LDAA0AAA gas furnace. On each heat call, the control board sends line voltage to the igniter, which glows red-hot to ignite the gas at the burners. Hot surface igniters are brittle silicon-carbide or nitride elements and are one of the most common furnace failure points — they crack from thermal cycling, contamination from oily fingers, or vibration. The included wiring kit replaces the connector and leads that often degrade alongside the element. A failed igniter is the classic cause of a furnace that runs the inducer and opens the gas valve but never lights, then locks out.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e1171306 (igniter)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded Kit\u003c\/td\u003e\n\u003ctd\u003e1188370 (igniter wiring kit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHot Surface Igniter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP (Tempstar \/ Heil \/ Comfortmaker)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits Model\u003c\/td\u003e\n\u003ctd\u003eRGS102LDAA0AAA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eOEM direct replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eDesigned for the ICP RGS102LDAA0AAA and the shared ICP furnace platforms sold as Tempstar, Heil, and Comfortmaker that use this hot surface igniter and connector. Match the igniter mounting and connector style to your existing part before installing.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Disconnect electrical power and verify zero voltage at the furnace with a multimeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the burner compartment service panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph the igniter position, bracket, and wiring connector before removal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug the igniter connector and unfasten the mounting screw. Handle the new element by its ceramic base only — never touch the hot surface element.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new igniter at the correct depth and angle, then connect it using the supplied wiring kit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore power, start a heat cycle, and confirm the igniter glows and lights the burners on the first try.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFurnace runs the inducer and clicks the gas valve but never lights\u003c\/li\u003e\n\u003cli\u003eIgniter does not glow, or glows weakly\/unevenly\u003c\/li\u003e\n\u003cli\u003eVisible crack, blister, or white spot on the igniter element\u003c\/li\u003e\n\u003cli\u003eRepeated ignition lockout after several failed light attempts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eShips same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63027637748083,"sku":"1171306","price":50.7,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047685177715,"sku":"1171306-GEN","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-silicon-carbide-1171306_5a0c2d0c-d24d-439c-89d1-2f9c379bc425.jpg?v=1782893788","url":"https:\/\/nationalhvacparts.com\/products\/icp-hot-surface-igniter-kit-for-rgs102ldaa0aaa-oem-1171306-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}