{"product_id":"icp-hot-surface-igniter-kit-for-rgs102hfca0aaa-oem-1171306-ships-today","title":"ICP Hot Surface Igniter Kit for RGS102HFCA0AAA — OEM 1171306 | Ships Today","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe OEM Hot Surface Igniter Kit (Igniter 1171306 with Wiring Harness Kit 1188370) is the ignition source for your ICP\/Tempstar\/Heil RGS102HFCA0AAA gas furnace. When the thermostat calls for heat, the furnace control board sends line voltage to the igniter, which glows white-hot to ignite gas at the burners. Hot surface igniters are brittle and degrade over time from thermal cycling and contamination, making them the single most common cause of a furnace that blows cold air or fails to light. This kit includes the matched igniter and its dedicated wiring harness, so you replace both the element and the connector that often becomes heat-damaged — restoring fast, reliable ignition. Never touch the igniter element with bare fingers; skin oils create hot spots that shorten its life.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eIgniter Part Number\u003c\/td\u003e\n\u003ctd\u003e1171306\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring Kit Part Number\u003c\/td\u003e\n\u003ctd\u003e1188370\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHot Surface Igniter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eICP \/ Tempstar \/ Heil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncludes\u003c\/td\u003e\n\u003ctd\u003eIgniter element + wiring harness kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eOEM exact replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBuilt for the ICP, Tempstar, and Heil RGS102HFCA0AAA gas furnace and related RGS-series models using this hot surface igniter and harness. Confirm your model and serial number before ordering. The included wiring kit ensures a clean electrical connection to the furnace control board.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First\u003c\/strong\u003e — Turn off gas and disconnect electrical power. Verify zero voltage with a multimeter before proceeding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e — Remove the burner compartment service panel to expose the igniter near the burners.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument\u003c\/strong\u003e — Photograph the igniter position, bracket orientation, and harness routing before disconnecting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove\u003c\/strong\u003e — Unplug the igniter harness, remove the mounting screw, and carefully withdraw the fragile igniter without bumping the burner assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall\u003c\/strong\u003e — Mount the new igniter (handle by the ceramic base only), install the new wiring harness, and confirm correct alignment over the burner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest\u003c\/strong\u003e — Restore gas and power, start a heat call, and verify the igniter glows and the burners light promptly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSigns You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFurnace blows cold air or fails to ignite on a heat call.\u003c\/li\u003e\n\u003cli\u003eIgniter does not glow, or shows cracks\/breaks in the element.\u003c\/li\u003e\n\u003cli\u003eRepeated ignition lockouts or short cycling.\u003c\/li\u003e\n\u003cli\u003eVisible heat damage to the igniter connector or wiring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eShips same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.\u003c\/p\u003e","brand":"ICP","offers":[{"title":"OEM","offer_id":63027642827123,"sku":"1171306","price":50.64,"currency_code":"USD","in_stock":true},{"title":"Generic","offer_id":63047684751731,"sku":"1171306-GEN","price":38.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/1190\/5395\/files\/nhvac-igniter-silicon-carbide-1171306_39e8852d-3d68-411d-b645-f6003463ad26.jpg?v=1782893766","url":"https:\/\/nationalhvacparts.com\/products\/icp-hot-surface-igniter-kit-for-rgs102hfca0aaa-oem-1171306-ships-today","provider":"National HVAC Parts","version":"1.0","type":"link"}